22A-A8P0F104

The Allen-Bradley 22A-A8P0F104 base drive belongs to the PowerFlex 4 family. This IP20 flange-mounted drive does not have a CE compliant filter, but it does have an output current of 8 Amps and a power of 1.5 kW (2 Horsepower). Flange-mounting means that the drive has a front that is adapted to environmental ratings in the IP20, Back/Heatsink NEMA/UL Type Open, IP40/54/65, and NEMA/UL Type 1/12/4/4X categories. The drive requires an input voltage of single-phase alternating current (AC) of between 200 and 240 Volts AC with a sinusoidal wave frequency of 50 to 60 Hertz.

The 22A-A8P0F104’s dimensions are 9.43 by 24.4 by 25 centimeters and its weight is 4.53 kilograms. The 22A-A8P0F104 can be installed on the DIN rail or panel mounting. For zero stacking, the space between the drives should be minimal when the temperature is between 40 and 50 degrees Celsius. The presence of an integral filter enables the cost-effective achievement of the prerequisites of Class A, EN55011, and B EMC. The drive has an integral keypad with a local potentiometer and programmable keys. A Basic Program Group contains the ten common programming app parameters. The screen displays four-digit figures and is surrounded by ten extra LED indicators.

An integral RS-485 communication port enables a personal computer to connect to a multi-drop configured network through a DF1 port, which connects any controller with a serial converter module. A remote or handheld keypad features a copycat function. A user can also remove the MOV when doing an operation on ungrounded distribution systems. Current build-up can be prevented by a relay pre-charge. An integral brake resistor brakes dynamically. In addition, the control wiring is flexible because a DIP switch can be adjusted to a 24 Volts DC source control or sink.