Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley PowerFlex 40 22B-A5P0F104

Product image is representative; revision or series may vary. Contact us to request a specific version.

22B-A5P0F104

|

The 22B-A5P0F104 drive is an adjustable frequency drive that has been designed and manufactured by Allen-Bradley/Rockwell Automation. It has been manufactured as part of the Allen-Bradley PowerFlex 40 series of AC-powered adjustable frequency drives. The 22B-A5P0F104 adjustable frequency drive is rated for 240 Volts AC 1-phase input voltage at 50 to 60 Hertz frequency. It can be flange-mounted inside an IP 20 rated open enclosure for protection. The 22B-A5P0F104 adjustable frequency drive operates with an output current rating of up to 5 Amps.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 22B-A5P0F104

ManufacturerAllen Bradley
CategoryDrives
Product LinePowerFlex 40
Part Number22B-A5P0F104
Weight3.00 lbs (1.36 kg)
Voltage240AC Volts
EnclosureFlange Mount - IP20, NEMA/UL Type Open
HP1 Horsepower
Amperage5.0 A
Phase1 Phase
FilterNo CE Compliant Filter
CommunicationRS-485
Input TypeKeypad

displacement power factor for the 22B-A5P0F104 is between 1.0 and 0.95 lagging over the entire speed range while the efficiency of the 22B-A5P0F104 is at a minimum of 97% at the full load and also at the maximum speed. The 22B-A5P0F104 has a diode or fully gated bridge on the input and it also includes a switching logic power supply operating from the DC bus. The 22B-A5P0F104 also comes with MOV protection which is built in with phase-to-phase and phase-to-ground protection with jumpers so as to eliminate the phase-to-ground unit whenever applicable. Another power component that comes with the 22B-A5P0F104 is a gold-plated plug-in connection on the printed circuit boards. Also, the 22B-A5P0F104 has a microprocessor-based inverter logic that is isolated from power circuits. Lastly, on the 22B-A5P0F104 power components, there is a nominal IGBT rise time of 200 N-s and inverter section has no commutation capacitors.

The 22B-A5P0F104 is designed to operate on an AC supply that might contain line notching and up to 10% harmonic distortion. The 22B-A5P0F104 does not require an isolation transformer to provide protection from line transients. However, in case there is an indication of a required transformer, the most appropriate k Factor is 4.0 or less. To drive the operating conditions, the display of the 22B-A5P0F104 comes with a 1-line by 4-character LCD with fault/alarm indication and it also comes with programming information. For communications, there is a DSI peripheral interface that provides for up to 2 independent peripherals to be connected to the drive at once. The connection and identification of the DSI port addresses do not require user adjustments. The Modbus protocol operates between 9600 and 38.4K Bps. The internal cards of the 22B-A5P0F104 use the drive power and the externally mounted cards are powered separately and connected to the drive through a cable. The storage ambient temperature is between -40 degrees Celsius and 85 degrees Celsius and the relative humidity for the 22B-A5P0F104 range is from 0 to 95%, non-condensing. The operational elevation is of up to 1000 meters without derating.

Revision Part #Also known as
22B-A5P0F104 Ser A22B-A5P0F104/A, Series A, Rev A
Don't see your particular revision? Contact us now.