22B-E3P0N104

This 22B-E3P0N104 part belongs to the PowerFlex 40 family by Allen Bradley. This module is three-phase; it is a drive that operates on a frequency between 50 or 60 Hertz, with a voltage rating of 500 to 600 Volts. Designed to be flexible and improve productivity, its programming structure is uncomplicated and it can communicate through Ethernet/IP, DeviceNet, Profibus and Modbus. Its safety features protect against damage to assets, and its variety of control technology (from torque and precise speed control to regulated open loop speed) can easily optimize applications. Its high-definition LCD, NEMA/UL type 4X remote, NEMA/UL type 1 hand-held LCD keypad, built-in indicators and IGBT Brake protect against unplanned downtime by providing advanced diagnostics. With a NEMA/UL Open enclosure (IP20), this unit weighs approximately 2.22 kilograms (or 4.9 pounds) and measures 180 x 100 x 136 millimeters (7.09 x 3.94 X 5.35 inches). Its sink/source control voltage is 24 Volts, its output rating around 2 Hp and 1.5 kW, and its output current rating 3 A. This module should be stored in an ambient temperature zone anywhere between -40 and 85 degrees Celsius.

The 22B-E3P0N104 is an Allen-Bradley adjustable frequency AC drive. This drive is part of the PowerFlex 40 product family which is capable of Volts / Hertz (V/Hz) control and Sensorless Vector Control (SVC) as its primary control method. It is also capable of implementing Proportional + Integral + Derivative (PID) driven closed loop control, enabling the drive to act as a stand-alone PID controller.

The 22B-E3P0N104 is operated by an input supply voltage range of 414- 660 Volts AC, 3-Phase. It delivers an output voltage of 0-575 Volts AC, 3-Phase, output frequency of 0-400 Hertz and typical efficiency of 97.5 %. It also provides an output current of 3.0 Amperes and power of 2.0 Horsepower or 1.5 Kilowatts.

The 22B-E3P0N104 has an integral RS-485 communication port. This enables the drive to be connected in daisy-chain topology. Use a shieleded two (2) conductor cable to implement this connection topology. At each end of the connection, terminating resistors are required to be installed to terminate connection. Additionally, network wiring should be separated from power lines by 0.3 meters or 1 foot. Furthermore, network crossing should be in right angle orientation.

For local operation and configuration, the 22B-E3P0N104 is supplied with an integral keypad.

The 22B-E3P0N104 also has embedded I/O channels which consists of 3 fixed for START/STOP/REV and four (4) fully programmable discrete inputs; four (4) fully programmable discrete outputs; two (2) 0…10V or 4…20 mA (unipolar) and one (1) N.O/N.C. dry contact and two (2) Digital / Optocoupler outputs.