The 22C-B017H103 is an Allen-Bradley PowerFlex 400 Series Air-Cooled Drive that is manufactured for fan and pump applications. The 22C-B017H103 has 5 Horsepower and it is a three-phase drive that runs with an amperage rating of 17 Amps. The input voltage for the 22C-B017H103 is 240 Volts AC and it is optimized for control of factory and commercial fans and pumps. The 22C-B017H103 is easy to install and therefore, it is one of the most widely used drives under the PowerFlex 400 drives. The 22C-B017H103 comes with open panel mount enclosure that is the IP20 NEMA/UL Type. Used on fans and pumps, the 22C-B017H103 offers additional power, control, and cost-effectiveness when it comes to speed control, especially when it is used in variable torque fan and pump applications.

The 22C-B017H103 contains Electrostatic Discharge (ESD) sensitive assemblies and parts. Therefore, it is important that the installers observe static control precautions when installing the 22C-B017H103. This also applies when testing, servicing or repairing the 22C-B017H103. In this regard, if users are not familiar with the static control measures, it is necessary to familiarize themselves before beginning to use the application. For the 22C-B017H103, the motor overload relay is set at the factory to 100% of the drive’s output current. Therefore, the overload setting will match the motor’s full-load amperage. However, before starting the drive, check it to make sure it is set properly for the equipment that it runs. The 22C-B017H103 can be connected to a fire alarm via a purge or through the use of a Function Loss input on the drive. It uses the Logix control platform that is critical in simplifying the parameter and tag programming. It also comes with the proportional, integral, and differential control loop to help maintain pressure.