22D-B8P0N104

The Allen-Bradley 22D-B8P0N104 is a PowerFlex 40P adjustable frequency B Frame-sized drive that has a 240V AC three-phase voltage rating and output current ratings of 8 A, 2 HP, and 1.5 kW at 200 to 240V AC input voltage. This drive has several I/O present, specifically 7 digital inputs (where 2 are semi-programmable and 5 are fully programmable), 1 DIP-switch-selectable analog input, 1 DIP-switch-selectable analog output, 1 programmable form C relay output, and 2 opto outputs. The enclosure rating of the 22D-B8P0N104 drive is NEMA Type open, IP20, and it is panel-mounted. This drive does not have an EMC filter installed and it is equipped with a human interface module (HIM) that is a display/fault reset only type, a 4-digit display, a reset button, 10 LED status indicators, and a keypad input. The approximate measurement of this drive is 3.94 x 9.61 x 6.34 inches.

Safety features, particularly trips for bus overvoltage and bus undervoltage, are present on the 22D-B8P0N104 drive. These trips will be triggered at 1005V DC bus, equivalent to an incoming line voltage of 711V AC, for the bus overvoltage. This drive’s bus undervoltage trip, on the other hand, will occur at 390V DC bus (at low voltage and equivalent to an incoming line of 275V AC) or 487V DC bus (at high-voltage and it is equivalent to an incoming line of 344V AC). Operators can also choose from two motor control options when using the 22D-B8P0N104 drive, which are the sensorless motor control and the volts per Hertz control. This drive should only be operated at an altitude of 1000 m or less and at temperatures between -10 to 50 °C.