22D-D024N104

The Allen-Bradley 22D-D024N104 is a PowerFlex 40P adjustable Frequency AC drive. This drive has programmable parameters allowing custom configuration of the drive, to fit with the specific application requirement of the process. With the utilization of the 22D-D024N104, modulating speed control of an AC motor may be achieved as well as energy savings, contributing to lower operational cost.

The 22D-D024N104 is powered by an external 3-phase supply voltage range 380-480VAC, input current of 26.0 Amperes, and input kVA of 23.4 kVA. The output capabilities of this drive are 0-460VAC, 3-Phase, output power of 11.0 kW or 15.0 HP and output Current of 24.0 Amperes. This drive supports panel mounting to an enclosure with IP20 NEMA / Open rated enclosure.

It provides parameter readout and diagnostic display of the 22D-D024N104 via the integral 4 digit display with 10 additional LED indicators provides an intuitive display of drive status and information.

The 22D-D024N104 has an embedded communication interface such as RS485 port, permitting programming using a laptop or desktop workstation. It supports multi-drop or daisy-chain configuration which further permit remote configuration and operation of the drive. Additionally, the 22D-D024N104 supports other communication protocols such as DeviceNet, EtherNet/IP, PROFIBUS DP, LonWorks and ControlNet by installing additional communication cards.

The 22D-D024N104 supports Zero Stacking, effectively reducing mounting space requirements of the drive. This effectively reduces the size of the control panel thus, reducing installation cost.

The 22D-D024N104 supports a 480V AC 3-phase input at 50-60 Hz. The range of allowed input voltages is from 342-528V AC. The maximum input current is 26 Amp and the maximum apparent power is 23.4 KVA. The output is rated at 11 KW or 15 HP and 24 Amp. The control methods the 22D-D024N104 supports are the Sinusoidal PWM, the Volts/Hertz, and the Sensorless Vector methods. The range of its output frequency is 0-500 Hz (programmable). It also supports 4 independently programmable acceleration and deceleration times. Each time can be programmed from 0 - 600 seconds in 0.1-second increments. The 22D-D024N104 supports digital control inputs, including 2 dedicated semi-programmable inputs for the start and stop modes and 5 programmable inputs for functions like preset speeds. It also supports 2 isolated analog control inputs. The 22D-D024N104’s control output types include 1 relay, 2 opto, and 1 non-isolated analog output. Its integral display and reset button enable the changing of the display parameters and they enable resetting if a fault occurs. A 4-digit display with 10 additional LED status indicators provides a visual display of the drive’s status. The 22D-D024N104 can handle 150% overload for 60 seconds or 200% overload for 3 seconds. Its relay pre-charge limits the inrush current. Its Bus Overvoltage Trip rating is 810V DC bus (equivalent to 575V AC incoming line voltage) and the Bus Undervoltage trip rating is 390V DC bus (equivalent to 275V AC incoming line voltage). The dimensions of this C-frame drive are 260 x 130 x 180 mm. The operating temperature range is from 14-122 Deg. Fahrenheit at 0-95% non-condensing humidity.