22D-E3P0N104

The Allen-Bradley 22D-E3P0N104 is a panel-mounted PowerFlex 40P adjustable frequency drive equipped with a display/fault reset only human interface module (HIM) version. The enclosure rating of this Frame B drive is NEMA Type Open, IP20 and it comes with a keypad input, a reset button, a 4-digit display, and 10 LED status indicators. Note that the 22D-E3P0N104 drive does not have an EMC filter installed. The I/O present on this drive include 1 DIP switch selectable analog input, 7 digital inputs (with 5 of them fully programmable and 2 semi-programmable), 1 DIP switch selectable analog output, 2 opto outputs, and 1 programmable form C relay output. The input voltage of this standard three-phase 22D-E3P0N104 drive is 600V AC, its input ratings are 414 to 660V AC, 3.8 A, and 3.65 kVA, and its output current ratings are 3 A, 1.5 kW, and 2 HP at 460 to 600V AC input and 0 to 575V AC output. This drive measures approximately 3.94 x 9.61 x 6.34 inches.

Trips, specifically bus undervoltage and bus overvoltage, are present on the 22D-E3P0N104 drive and these are 487V DC bus (equivalent to a 344V AC incoming line and for high voltage) and 390V DC bus (equivalent to a 275V AC incoming line and for low voltage) for the bus undervoltage trip, and 1005V DC bus for the bus overvoltage, which is equivalent to a 711V AC incoming line. Two motor control options are also available on the 22D-E3P0N104 drive and these are volts per Hertz and sensorless motor control.