22D-E4P2N104

The 22D-E4P2N104 PowerFlex 40P Adjustable Frequency AC Drive is part of the PowerFlex 40P series by Allen-Bradley, used to control 3-phase induction motors in applications requiring speed and torque control. The drive has a removable Metal Oxide Varistor, Integral DC brake Transistor, DIP switch with adjustable source controls, and it gives a reliable overload protection of 150% for 1 minute, and 200% for 3s. It has input ratings of 5.2KVA and 5.3A at an AC input range of 414 to 660V AC, and it has output ratings of 2.2kW (3.0HP) at a 4.2A current, and a tolerance range of ±10% at 48 to 63Hz, with a 0.98 displacement power factor. The drive has a BUS overvoltage and under-voltage trips to 1005V DC and 487V DC, and it has a 300% instantaneous current fault limit. The drive provides a Class 10 Electronic Motor Overload Protection with the i² t Algorithm protection, and it utilizes a removable MOV (Metal Oxide Varistor) for ground fault trip protection.

The 22D-D1P4H204 uses a Sensorless Vector Control and standard Volt per Hertz control to control the motor, and it utilizes the Sinusoidal PWM signal with a 2 to 16 KHz programmable carrier frequency range to control outputs. It offers ±1% of the base speed control across an 80: 1-speed range, in an open loop with slip compensation, and offers ±0.05% of the base speed regulations across a 20:1 speed-range using encoder device. It comes with 5 programmable and 2 dedicated digital inputs, with 24V DC Source/ Sinks control, adjustable through a DIP switch, and it comes with 2 isolated 0 to 10V DC and 4 to 20mA analog inputs, with 100k ohms and 250 ohms input resistance. The 22D-D1P4H204 has a double-channel incremental encoder with 50%, +10% duty cycle, and it comes with a Human Interface Module (HIM) with display/fault reset buttons function for programming. It has an integral RS-485 communication port which allows for simple programming by a host PC. The 22D-D1P4H204 has an operating temperature range of 14 to 122°F, with a storage temperature range of -40 to 185°F, at 5 to 95% non-condensing humidity, and its maximum installation height is 1000m. It has a panel mount option, and it comes in a NEMA Open Type (IP20) rated enclosure.