22F-B8P0N103

The 22F-B8P0N103 is a solid-state adjustable frequency AC drive belonging to the PowerFlex 4M product line from Allen-Bradley. The PowerFlex 4M AC drives are available in three frame sizes (A, B, and C), power ratings from 0.2-11 kW (0.25-15 HP) and in voltage classes of 120, 240, and 480 volts. The 22F-B8P0N103 belongs to the 240V AC class. Specifications for the voltage supply input is three-phase, 180-265V AC (50-60 Hz). The power consumption is 4.0 KVA at 9.5 A. The drive is not equipped with an EMC filter or a brake. The output of the 22F-B8P0N103 drive is rated at 1.5 kW (2 HP) at 8A and the output frequency range is from 0-400 (programmable). An integrated keypad is provided as the Human Interface Module (HIM) on the 22F-B8P0N103. The Basic Program Group contains the 12 most common configurable parameters. A 4-digit LED display is also provided for displaying drive status and information. The 22F-B8P0N103 is also possible to use the serial converter module to communicate with any controller that supports DFI messaging. A relay pre-charge limits the inrush current and fuses that are rated at 15A provide branch circuit protection. The drive can sustain a 150% overload for 60 seconds and it can withstand a 200% overload for 3 seconds. The range of the 22F-B8P0N103’s operating temperatures is from -10 to 50 Degree Celsius (14-122 Degree Fahrenheit) at 0-95% relative humidity (non-condensing). An integrated fan is provided for cooling and the heat dissipation during operation is 85 W. The 22F-B8P0N103 drive is enclosed in an IP20-rated NEMA/UL open-type enclosure. The product frame size is A with dimensions of 174 x 72 x 136 mm and the shipping weight is 1.6 kg.

This product permits modulating speed control of industrial AC motors using Volts per Hertz (V/Hz) control method or commonly known as Scalar control. With scalar control, modulating speed is achieved along a constant Torque along the entire frequency range of the 22F-B8P0N103 adjustable frequency AC drive.

The 22F-B8P0N103 feature an embedded RS485 interface and A frame drive that supports not only Panel Mounting but DIN Rail installation. It also supports Zero Stacking wherein, drives may be installed side by side with minimum mounting space, significantly reduces the installation requirements occupied by Two or more drives. This installation options provide flexibility and contributes to cost effectiveness of the 22F-B8P0N103 adjustable frequency AC drive.

The 22F-B8P0N103 is energized via an input voltage supply ranging from 180-265VAC, 3-Phase along an input current of 9.5 Amperes. It produces a 3-Phase voltage supply to the motor, ranging from 0-230VAC, 3-Phase along an output current of 8.0 Amperes, output frequency of 0-400Hz and power output that is applicable for motors rated 1.5kW (2.0 HP). The typical overall efficiency of the 22F-B8P0N103 is 97.5%.

The 22F-B8P0N103 comes with an over voltage trip that occurs at 405V DC bus voltage (equivalent to 290V AC incoming line) and undervoltage trip that is triggered during detection of 210V DC bus voltage (equivalent to 150V AC incoming line). This drive also features a minimum control ride through of 0.5 seconds with typical value of 2 seconds.