25A-B024N104

The 25A-B024N104 is an adjustable frequency AC drive that is manufactured by Allen-Bradley. It is part of the PowerFlex 500 product family and specifically belongs to the PowerFlex 523 sub-category. This drive and the entire PowerFlex series are mainly used to implement standard and advanced motor controls particularly ON/Off and modulation of Speed and Torque of an AC motor. This drive may also be used to efficiently start and stop the connected AC motor with the use of starting and stopping modes, readily configurable within the drive. Specifically, the 25A-B024N104 configurable control methods help define the type of control and output characteristics for motor control. These control methods include Volts per Hertz (V/Hz), Sensorless Vector Control (SVC), SVC with economizer. For efficient starting and stopping as well as limiting the generation of high levels of current and minimizing the effects of mechanical stress due to abrupt change in a motor rotational direction, this drive is provided with configurable starting acceleration and deceleration which can be independently configured while a variety of stopping modes such as Ramp, Coast, DC-Brake, and Ramp-to-Stop. To implement standard On/Of motor control, the built-in standard Human Interface Module (HIM) may be used for local configuration, monitoring, and control.

The Allen-Bradley 25A-B024N104 is an adjustable frequency AC drive. This drive has a power rating of 7.5 HP or 5.0 kW, and an operating voltage range of 0-230 VAC, 3-Phase. The 25A-B024N104 provides a wide range of motor control such as Volts per Hertz, sensorless vector control, and sensorless vector control economizer mode. Its frame size is B and its enclosure type is IP20 NEMA / Open. It has a standard HMI feature. The 25A-B024N104 allows edge-by-edge mounting with 50-millimeter air flow at the top and bottom of the drive. This unit plays a vital role in supporting low-cost networking via a combined RS485/DSI port.