The 25A-D6P0N104 is a NEMA/IP20 packed modular PowerFlex 523 AC Drive by Allen-Bradley with a 480V AC (3-phase) and 1.1kW power rating. It is used for industrial applications that requires modulating speed control of AC motors. The AC drive’s operating voltage range is 380-480V AC (3-phase) at 47-63Hz, with a 6A output current and a 1.1kW output power. The 25A-D6P0N104 has a voltage tolerance range of -15% /10%, with a 0.98 displacement power factor across the whole speed range and a maximum short-circuit rating of 100,000A. It offers a 405V DC over-voltage trip with a 390V DC under-voltage trip and Class 10 motor overload protection. It also comes with an internal overcurrent protection rated 200% hardware limit and a 300% instantaneous fault limit. It is also equipped with power or logic ride thru time of 100ms, and 0.5s.

The 25A-D6P0N104 provides control performance through the Sensorless vector control, the Sensorless vector control with Economizer, and the Volts per hertz controls with performance ranges of +/-1% of the base speed across a 60:1 speed range, and of +/-0.5% of the base speed across a 100:1 speed range. It has an output range of 0-500Hz, with a carrier frequency range of 2-16 KHz, and an output voltage of 0 to the rated motor output. The 25A-D6P0N104 has 5 digital inputs, with a 24V DC Source or Sink Control that is selectable via a DIP switch, and 1 current and unipolar 10-bit analog input.

It also has 1 Form C Relay Output with 3A and 0.5A resistive and inductive ratings and a drive efficiency of 97.5%. The 25A-D6P0N104 provides BUS over-voltage and under-voltage protection and it provides Class 10 Motor Overload protection. The 25A-D6P0N104 has an IGBT and DC braking option, and it provides position control via a single integral PID loop. The drive comes with an integrally fixed keypad and a multi-language LCD for the HIM interface, and it supports MainFree programming via a USB cable. The 25A-D6P0N104 communicates through the embedded Ethernet/IP communication port, which allows for programming via a PC and an integral RS-485/DSI port which allows for multi-drop network configuration. The drive also supports optional PROFIBUS DP, DeviceNet, and PROFIBUS communication cards for an enhanced network. It supports zero stacking for saving space and it can maintain its optimal function at a temperature range of -4-122 Degree Fahrenheit, at 0-90% non-condensing relative humidity and it is stored at -40-185 Degree Fahrenheit temperature range. The 25A-D6P0N104 is installed using the DIN Rail mounting option or the Screw mounting option and can function without de-rating, at a maximum installation height of 1000m. It can withstand a 1G operation vibration with a 15G shock, and it weighs about 2.3Kg, with total dimensions of 109mm x 220mm 184mm.

This frequency drive is a compact and scalable hardware that when configured properly, delivers an outstanding discrete and analog control of industrial AC motors, enabling basic motor and modulating speed control. This drive is popularly used in a wide variety of industries as AC motors are one of the typical actuators in the field.

By supplying an input voltage range of 323-528VAC, 3-phase and input current of 7.5 Amperes, the drive is able to deliver an output voltage of 0-460VAC, 3-Phase, output current of 6.0 Amperes and power of 3.0kW (2.2 HP). This drive features an enclosure that is IP20 / NEMU Open type rated, a Frame A body with physical dimensions of 152.0 (5.98) Height x 72.0 (2.83) Depth x 172.0 (6.77) Width. It comes with an integral brake system and fixed keypad and LCD readout, allowing operator to set and operate the drive.