25A-E019N104 | Allen Bradley Drives PowerFlex 523

25A-E019N104

Rated 4.9 with 8 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

25A-E019N104

Revisions: Ser A 
Description: The Allen-Bradley 25A-E019N104 drive is a PowerFlex 523 series adjustable frequency drive. It uses 3-phase AC voltage for its input and output voltage. The 25A-E019N104 adjustable frequency drive’s input voltage range is from 525 to 600 Volts AC and its output voltage range is from 0 to 575 Volts AC. This drive will trip automatically to protect itself when overvoltage or undervoltage situations occur. The 25A-E019N104 adjustable frequency drive has a maximum output current rating of 19 Amps.
Call
Request a quote for 25A-E019N104

Description: The Allen-Bradley 25A-E019N104 drive is a PowerFlex 523 series adjustable frequency drive. It uses 3-phase AC voltage for its input and output voltage. The 25A-E019N104 adjustable frequency drive’s input voltage range is from 525 to 600 Volts AC and its output voltage range is from 0 to 575 Volts AC. This drive will trip automatically to protect itself when overvoltage or undervoltage situations occur. The 25A-E019N104 adjustable frequency drive has a maximum output current rating of 19 Amps.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 25A-E019N104.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 8 reviews

    Technical Specifications for 25A-E019N104

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.25A-E019N104
SeriesPowerFlex 523
VoltageThree Phase, 600 VAC
Output Current19 Amperes
Enclosure TypeIP20 NEMA / Open Type
Interface ModuleStandard
Frame SizeFrame D
EMC Filtering OptionNo Filtering
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.25A-E019N104
SeriesPowerFlex 523
VoltageThree Phase, 600 VAC
Output Current19 Amperes
Enclosure TypeIP20 NEMA / Open Type
Interface ModuleStandard
Frame SizeFrame D
EMC Filtering OptionNo Filtering
s

About 25A-E019N104

The Allen-Bradley 25A-E019N104 drive is an AC-powered drive from the PowerFlex 523 product line of drives that do not come with an EMC filter, but it has a standard interface module and brake installed. This drive comes in a D frame and has a 600 Volts AC three-phase voltage rating. The output current of the 25A-E019N104 drive, at a three-phase input of 525 to 600 Volts, 19 Amps and its Horsepower and kW ratings are the same at both normal duty and heavy-duty operations, specifically 15 Horsepower and 11 kW.



 



Trips will automatically occur on this drive when it experiences undervoltage and overvoltage. Its bus overvoltage trip will occur at 1005 Volts DC (equivalent to a 711 Volts AC incoming line) and its bus undervoltage trip is at 487 Volts DC bus (the same as a 344 Volts AC incoming line). The input voltage tolerance of the 25A-E019N104 drive is -15% of the minimum voltage and 10% of the maximum, while its frequency tolerance ranges from 47 to 63 Hertz. On the other hand, its output voltage is 0 to the drive’s rated motor voltage and its output frequency range, which is programmable, is 0 to 500 Hertz. The overcurrent protection of this drive is at 200% of the hardware limit and 300% of the instantaneous fault. Selectable controls available for this drive are sinusoidal PWM, volts per Hertz, economizer SVC motor control, and sensorless vector control. The 25A-E019N104 drive is also equipped with 1 digital input (dedicated for stop), 6 digital inputs that can be programmed, 2 isolated analog inputs, 2 relay outputs (Form A and Form B) that are fully programmable, 1 non-isolated analog output, and 2 opto outputs that can also be programmed.



Technical Description of 25A-E019N104

Allen-Bradley PowerFlex 523 AC Drive has Three Phase, 600 VAC voltage and 19 Amperes Output

Repair Services for 25A-E019N104

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote
Our highly skilled technicians can repair your 25A-E019N104. All of our repairs come with a 1 Year Warranty. Please contact us for additional information about our repairs process.

Revisions for 25A-E019N104

Please refer to the manual for more information about the 25A-E019N104 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
25A-E019N104 Ser A
25A-E019N104/A, Series A, Rev A Request Quote
Common misspellings:
  • 25A-Eo19N104
  • 25A-E0l9N104
  • 25A-E019Nl04
  • 25A-E019N1o4
  • 25A-E019N10A
  • 25AE019N104

Dimensions For 25A-E019N104

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 25A-E019N104

Width (w/Mounting Hardware) 5.12 in. (130.0 mm)
Height (w/Mounting Hardware) 10.24 in. (260.0 mm)
Depth 8.35 in. (212.0 mm)
Mounting Bracket Hole Width 4.57 in. (116.0 mm)
Mounting Bracket Hole Height 9.72 in. (247.0 mm)
Weight 8.6 lb (3.9 kg)

Resolutions For 25A-E019N104

About

Technical Specifications for 25A-E019N104

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.25A-E019N104
SeriesPowerFlex 523
VoltageThree Phase, 600 VAC
Output Current19 Amperes
Enclosure TypeIP20 NEMA / Open Type
Interface ModuleStandard
Frame SizeFrame D
EMC Filtering OptionNo Filtering
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.25A-E019N104
SeriesPowerFlex 523
VoltageThree Phase, 600 VAC
Output Current19 Amperes
Enclosure TypeIP20 NEMA / Open Type
Interface ModuleStandard
Frame SizeFrame D
EMC Filtering OptionNo Filtering

About 25A-E019N104

The Allen-Bradley 25A-E019N104 drive is an AC-powered drive from the PowerFlex 523 product line of drives that do not come with an EMC filter, but it has a standard interface module and brake installed. This drive comes in a D frame and has a 600 Volts AC three-phase voltage rating. The output current of the 25A-E019N104 drive, at a three-phase input of 525 to 600 Volts, 19 Amps and its Horsepower and kW ratings are the same at both normal duty and heavy-duty operations, specifically 15 Horsepower and 11 kW.



 



Trips will automatically occur on this drive when it experiences undervoltage and overvoltage. Its bus overvoltage trip will occur at 1005 Volts DC (equivalent to a 711 Volts AC incoming line) and its bus undervoltage trip is at 487 Volts DC bus (the same as a 344 Volts AC incoming line). The input voltage tolerance of the 25A-E019N104 drive is -15% of the minimum voltage and 10% of the maximum, while its frequency tolerance ranges from 47 to 63 Hertz. On the other hand, its output voltage is 0 to the drive’s rated motor voltage and its output frequency range, which is programmable, is 0 to 500 Hertz. The overcurrent protection of this drive is at 200% of the hardware limit and 300% of the instantaneous fault. Selectable controls available for this drive are sinusoidal PWM, volts per Hertz, economizer SVC motor control, and sensorless vector control. The 25A-E019N104 drive is also equipped with 1 digital input (dedicated for stop), 6 digital inputs that can be programmed, 2 isolated analog inputs, 2 relay outputs (Form A and Form B) that are fully programmable, 1 non-isolated analog output, and 2 opto outputs that can also be programmed.



Technical Description of 25A-E019N104

Allen-Bradley PowerFlex 523 AC Drive has Three Phase, 600 VAC voltage and 19 Amperes Output
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote
Our highly skilled technicians can repair your 25A-E019N104. All of our repairs come with a 1 Year Warranty. Please contact us for additional information about our repairs process.
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote
Our highly skilled technicians can repair your 25A-E019N104. All of our repairs come with a 1 Year Warranty. Please contact us for additional information about our repairs process.
Revisions

Please refer to the manual for more information about the 25A-E019N104 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
25A-E019N104 Ser A
25A-E019N104/A, Series A, Rev A Request Quote

Common misspellings:
  • 25A-Eo19N104
  • 25A-E0l9N104
  • 25A-E019Nl04
  • 25A-E019N1o4
  • 25A-E019N10A
  • 25AE019N104
PDF
Dimensions

Dimensions For 25A-E019N104

Width (w/Mounting Hardware) 5.12 in. (130.0 mm)
Height (w/Mounting Hardware) 10.24 in. (260.0 mm)
Depth 8.35 in. (212.0 mm)
Mounting Bracket Hole Width 4.57 in. (116.0 mm)
Mounting Bracket Hole Height 9.72 in. (247.0 mm)
Weight 8.6 lb (3.9 kg)