The Allen-Bradley 25A-V1P6N104 PowerFlex 523 AC Drive is a modular designed 120V AC (1-phase) drive, which provides multi-purpose control for a wide range of applications that have output ratings of up to 22kW. The drive has an output current of 1.6A, with an output power of 0.2Kw (0.25HP) at a single-phase, operational voltage range of 100 to 120V AC. Its voltage tolerance range is -15% / +10% at 47-63Hz, and its displacement factor is 0.98 across the whole speed range, with a maximum short-circuit rating of 100,000A.  It offers a 405V DC BUS overvoltage trip, with a 190V DC under voltage trip, and it has a 100ms power ride-thru time, with a 0.5s Logic ride thru time. It provides Class 10-level  motor overload protection, with over-current protection, and a short-circuit trip via Phase-to-phase on the drive’s output. The drive has a default carrier frequency of 4 KHz, and a 2-16 kHz operational range, and it controls machines via the Volts/Hertz, Sensorless Vector Control, and the Economizer SVC motor control. It has a V/Hz performance range of ±1% of base speed across a 60: 1-speed range, and the SVC/SVC Economizer performance range of ±0.5% of base speed across a 100:1 speed range.

The 25A-V1P6N104 drive has an output range between 0V and the rated motor voltage, and it has a programmable output frequency range between 0 to 500Hz. it has an overall efficiency of 97.5% and employs the Ramp, Coast, DC-Brake, and Ramp-to-Stop multi-programming stop modes. It has 5 Digital inputs, with 10 Rad/s open and closed loop bandwidth, selectable between either the Source or sink mode, through a DIP switch setting, and it uses the open collector input that has an input frequency range of 0-100 kHz for input signals. It has a 10-bit 0-10V/4-20mA Analog input with 100 K Ohms and 250 Ohms of input impedance, and it has 1 Form C Relay output with 0.5A and 3Ainductive and resistive rating, and 1 Non-Isolated 0-10V or 4-20 mA Analog output. It has an embedded Ethernet/IP port, with the Integral RS485 communication port, DeviceNet option card, and PROFIBUS DP option card. It has a working temperature range between -4 and 122 ^oF without de-rating, at 5-95% non-condensing relative humidity level, and can be installed at an altitude as high as 1000m (3300ft) without de-rating. It weighs about 1.1Kg and has net dimensions of 72mm x 152mm x 172mm.