The 25B-A4P8N104 is an AC drive from Rockwell Automation, it is from the PowerFlex 525 series. When the users receive the drive, it is recommended that they check the packaging for any visible damage. If there is any visible damage, users should contact the shipping company immediately. The 25B-A4P8N104 drive should be carefully removed from the packaging and inspected. It should be installed according to the instructions provided by the manufacturer. Users should install the drive in such a way that the minimum clearances and mounting considerations are met. The screws of the drive should be tightened with the specified torque. Applying more torque may damage the screws or break them.
Follow the safety instructions and make sure the connections are secure before turning on the power to the drive. The drive should be installed by a person who is familiar with the system to who can make sure the installation is done correctly. The drive has an input voltage requirement of 240 Volts AC single-phase power and the maximum current rating of the drive is 4.8 Amps. The power rating of the drive is 1.0 Horsepower or 0.75 kW. The drive is enclosed in an IP20 NEMA type enclosure. The 25B-A4P8N104 has a standard interface but not an EMC filter. There is a standard braking system in the drive. Do not expose the 25B-A4P8N104 drive to a corrosive atmosphere and protect it from moisture and direct sunlight. The cooling fan should be protected from dust and metallic particles.
Repair Services for 25B-A4P8N104
||$244.31||Add to Cart |
Our highly skilled technicians can repair your 25B-A4P8N104. All of our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair process.
Revisions for 25B-A4P8N104
Please refer to the manual for more information about the 25B-A4P8N104 such as the wiring diagrams, data sheets,
firmware information and migration or obsolescence details.
|Revision Part #
||Also Known as
||25B-A4P8N104/A, Series A, Rev A