25B-B2P5N104

The Allen-Bradley 25B-B2P5N104 is an adjustable frequency AC drive from the PowerFlex 525 product family. This drive is a 240VAC, 3-Phase, 47-63 Hz operated and delivers output power of 0.4 kW or 0.5 HP for normal and heavy-duty operation as well as output Current is 2.5 Amperes with an IP20 NEMA / Open rated enclosure. It comes with embedded Human Interface Module (HIM) equipped LCD display and buttons that allow for out-of-the-box configuration and operation of the drive.

Additionally, this drive has built-in I/O channels that allow wiring of external signaling and indicating devices that may be used to remotely and conveniently operate the drive locally or remotely. The I/O channels are composed of Seven (7) Sink / Source discrete inputs that may act as the remote Start, Stop, Forward, Reverse, Jog, Local and Remote I/O of the drive; One (1) N.O. and One (1) N.C. dry contact outputs; Two (2) Digital / Optocoupler outputs that may be used to energize signaling devices such as pilot lamps, siren, horn and other indicating and sounding devices; Two (2) 0-10VDC; 0-20mA analog input channels that may serve as the drive’s speed reference and One (1) Analog Input 0-10VDC / 0-20mA analog output channel that may be wired to analog indicating devices or Programmable Logic Controller (PLC) analog input channel as speed feedback. It also has a dedicated potentiometer input terminal that accepts resistance signal that may act as secondary speed reference.

The 25B-B2P5N104 has a 0.5 Horsepower drive rating, with a 2.5 Amps current rating at 240 Volts AC, and it has 3-phase line input voltage range of 200 to 240 Volts AC. It has 0.98 displacement power factor across the entire speed range and an operational efficiency of 97.5%. It is capable of providing overvoltage and under-voltage trips, with a fast-acting current limiting capability, and it provides NEC Article 430 Standard Class 10 level electronic motor overload protection. The 25B-B2P5N104 has a normal duty overload capability of 110% for 1 minute, and it is designed to ride faultlessly through 100 milliseconds of low voltage/power loss condition. It has MOV (metal oxide varistor) which provides phase-to-phase and phase-to-ground protection as well as high-voltage suppression for fault-free operation. It offers selectable motor control methods ranging from sensorless vector control to standard volt per hertz control and it provides an adjustable pulse width modulated frequency with an output accuracy within ±0.05% of the set output frequency. The 25B-B2P5N104 has remote configuration capability that is made possible via the embedded Ethernet/IP communication port, which allows for control and access to critical operation data over the Ethernet network. It also has an integral RS-485 communication capability, which enables the drive to be used in multi-drop configurations. The 25B-B2P5N104 has enhanced I/O wiring made of 2 Analog inputs control, 7 (1 dedicated, and 6 programmable) digital input, 1 Analog output and 2 programmable relay outputs for additional control. It has -20 to 50 degrees Celsius (-4 to 122 degrees Fahrenheit) operating temperature limits, at a non-condensing relative humidity range of 5 to 95%, and it can be stored at a range of -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit). The 25B-B2P5N104 has a net weight of 1.1