25C-A011N104

The 25C-A011N104 PowerFlex 527 Adjustable Frequency Drive by Allen-Bradley is a 240V AC, 3HP adjustable frequency drive with built-in EtherNet/IP and safety dual network port, designed specifically for use with an Allen-Bradley Logix Programmable Automation Controller (PAC). The drive has an output voltage range of 200-240V AC (single-phase), with an 11A output current, and a total power rating of 3HP. The 25C-A011N104 offers a BUS overvoltage trip of 405V DC, and a BUS under-voltage trip of 190V DC, and it has 100ms, maxim power ride-through time. The drive has a voltage tolerance of -15% / +10% of the drive voltage rating, at 47-63Hz, and it has a displacement power factor of 0.98. The drive can provide 100,000A, maximum short-circuit fault limit, and it provides Class 10 motor overload protection. It provides an overcurrent protection of 200% hardware limit, and 300% instantaneous fault, and it offers a phase-to-phase short-circuit trip. The 25C-A011N104 has 3 basic motor control methods, the frequency control, with Basic Volts/Hertz, Sensorless Vector Control (SVC), and Sensorless Vector Control with Economizer. It also provides position loop with the Closed Loop Position Vector Control and velocity loop with the Closed Loop Velocity Vector Control. The drive has a carrier frequency range of 2-8 kHz, with 4 kHz as the default value, and the frequency control has an accuracy of ±0.05%. The 25C-A011N104 has an output voltage, ranging between 0 and 240V AC, at 0-90Hz, and it has an overall efficiency of 97.5%. It has 4 programmable 6mA digital outputs, which can be switched from Source (SRC) 18-24V = ON/0-6V = OFF mode, to Sink (SNK) 0-6V = ON/18-24V = OFF mode, via a special DIP switch. The 25C-A011N104 also has 2 (±10V, 4-20 mA) 10-bit analog control inputs with 100KΩ/250Ω input impedance, and it has a 1-10kΩ, 2W load on all external input ports. The drive has 1 Programmable Form A relay output and 1 Programmable Form B relay output, with 3A at 30V DC, and 3A at 240V AC resistive rating, and 0.5A at 30V DC, 0.5A at 125V, and 0.5A at 240V AC inductive ratings. The 25C-A011N104 also has 2 programmable, 30V DC, 50 mA Non-inductive Opto output, and a single, 10-bit, non-isolated, 0-10V or 4-20 mA analog output with an output impedance of 1KΩ/525Ω. The drive has a 1000m (3300ft) maximum installation height, without de-rating, and it is built to withstand a 15G operational shock and a 2G vibration. The 25C-A011N104 has an IP20/NEMA Open-Style enclosure, and it can be mounted using either a DIN rail or screw. It has a functional ambient temperature range of -20-50 oC (-4-122 oF) without de-rating, at 0-95% non-condensing relative humidity range, and it can be stored at a temperature range of -40-85 oC (-40-185 oF). The 25C-A011N104 has net dimensions of 72mm x 152mm x 172mm (2.83in x 5.98in x 6.77in) with an approximate weight of 1.6Kg (3.5lb) and it is cUL-us, RCM, CE, KCC, EAC, and ODVA-certified.