25C-A2P5N114

The 25C-A2P5N114 PowerFlex 527, Variable Frequency Drive by Allen-Bradley is an adjustable frequency drive with a standard interface, standard dynamic braking, and a line filter. Its input voltage ranges from 170-264V AC, alongside a voltage tolerance of -15-10% at 47-63Hz, with 2.5A output current and an output power rating of 0.4KW (0.5HP). The drive offers BUS over-voltage and under-voltage trip, with 100ms power ride thru time, and it has a 0.5s Logic control ride thru time. The 25C-A2P5N114 offers motor overload protection (Class 10), and an over-current protection at 200% hardware and 300% instantaneous fault limits. It has a 0.98 power factor across the entire speed range, with a 100,000A maximum short-circuit limit, and it has an IGB transistor. The 25C-A2P5N114 uses an SVC with a ±0.5% base speed across a 100:1 speed range, a Volt/Hertz (V/H) control with ±1% base speed across a 60:1 speed range, and a Sensorless Vector Control Economizer with ±0.5% base speed performance, across a 100:1 speed range, for frequency control, and it uses a Closed Loop Position Vector Control, and a Closed Loop Velocity Vector Control with ±0.1% base speed across a 100:1 speed range, for positioning and velocity control. The drive has a 2-8 KHz selectable carrier frequency range, with 4 KHz as default frequency, and its control has a frequency accuracy within ±0.05% of the configured output frequency. The 25C-A2P5N114 has an output rating of 0 to the motor voltage rating, at a programmable frequency of 0-590Hz, and an efficiency of 97.5% and it provides the Disable and Coast, Current Decel and Disable, and the Ramped Decel & Disable stop modes. The drive has an intermittent overload capacity of 110% for up to 60s, and 150% for up to 3s. The 25C-A2P5N114 has 4 programmable, digital inputs with Source and Sink modes selectable via a DIP switch, and with 2, ±10V and 4-20 mA, 10-bit analog inputs, with 100KΩ and 250Ω input impedance, and a 1-10KΩ, 2W external pot load. The 25C-A2P5N114 drive also has a safety control input which is optically-isolated and has a reverse voltage protection, with an 18-26.4V DC maximum input voltage range and an input current of <10mA. It has 2 programmable relay outputs, with 10-bit analog output, and it uses an incremental and dual-channel output encoder with 5V, 12V, at 250mA power rating, and duty cycles of 50%, and +10%. The 25C-A2P5N114 has a maximum installation altitude of 1000m without de-rating and it comes in a NEMA open-style enclosure, with an IEC 60721-3-3-compliant conformal coating. It has a functional temperature bracket of -20-50 oC (-4-122 oF) at 0-95% non-condensing relative humidity, and it can withstand a vibration of 2G and a shock of 15G. The 25C-A2P5N114 is mounted using either the DIN rail or screw method, and it weighs approximately 1.1Kg (2.4lb) with dimensions of 72mm x 152mm x 172mm (2.83in x 5.98in x 6.77in). Since this drive is designed for industrial use and on factory floors, there is One EMC Filtering Option.