25C-A8P0N104

The 25C-A8P0N104 PowerFlex 527 Adjustable Frequency Drive is a 3-phase adjustable drive by Allen-Bradley with a standard interface and dynamic braking. Its input voltage ranges from 170-264V AC with an output current of 8A and an output power of 1.5KW (2HP). The 25C-A8P0N104 has a BUS overvoltage over-trip of 405V DC with an under-voltage trip of 190V DC, and it has 100ms and 0.5s ride through times for power and logic control. It has a voltage tolerance of -15-10%, and it has a power factor of 0.98 across all speed ranges. It has a Class 10 motor overload protection, and it offers overcurrent protection. The 25C-A8P0N104 can provide a short-circuit protection of up to 100,000A, with phase-to-phase and phase-to-ground, short-circuit and ground fault trip, and it employs an IGBT (Isolated Gate Bipolar Transistor). The drive controls signal frequency, using the Basic Volts/Hertz, Sensorless Vector Control (SVC), and the SVC Economizer. The drive also provides positioning using the Closed Loop Position Vector Control, and velocity control through the Closed Loop Velocity Vector Control with ±0.1% of base speed across a 100:1 speed range performance using an encoder. The 25C-A8P0N104 has 4 programmable, (6mA) digital inputs, with Sink (0 to 6V DC= ON/18 to 24V DC= OFF) mode, and Source (18 to 24V = ON/0 to 6V = OFF) mode, selectable via a DIP switch, and the double isolated 10-bit, ±10V and 4-20 mA analog inputs, with 100-250Ω input impedance. The 25C-A8P0N104 has a <10mA, optically-isolated and reverse voltage protected input, with 18-26.4V DC, 10mA ON-state ratings, and 5V DC, 500A OFF-state ratings, and it utilizes a SELV/PELV power source. The drive has 1 programmable form (A) and 1 programmable form (B) control relay outputs, and one 0-10V or 4-20 mA, 10-bit, non-isolated analog control output. The 25C-A8P0N104 uses an incremental and dual-channel encoder, with 90 o quadrature, and 50%, +10% duty cycles. It has a working temperature range of -20-50 oC (-4-122 oF) at 0-95% non-condensing relative humidity, and is built for storage at a range of -40-85 oC (-40-185 oF). The 25C-A8P0N104 employs either the DIN rail or screw mounting system, and it comes with an IP20/NEMA open enclosure. It has a maximum power dissipation of 81W, and it has c-UL-us, ODVA, RCM, TUV, RoHS, and CE certification. The 25C-A8P0N104 weighs around 1.6Kg (3.5lb) and it measures 87mm x 180mm x 172mm (3.43in x 7.09in 6.77in). Since this drive is designed for industrial use and on factory floors, there is no EMC filtering option.