25C-D010N104

The 25C-D010N104 belongs to the Allen-Bradley PowerFlex 527 Product family. More popularly known as Variable Frequency Drive (VFD), Variable Speed Drive (VSD), Frequency Inverter, Inverter or simply drive, the 25C-D010N104 is commonly used in applications actuated by AC motors. This drive is used to modulate the speed and Torque of the AC motor, with the added capability of controlling the position and velocity. This is accomplished through the supported control methods of the drive which includes Basic Volts/Hertz, Volts/Hertz for Fan and Pump applications, Sensorless Vector Control (SVC) and economizer Sensorless Vector Control (SVC). It also supports Position loop control via Closed loop position Vector control and Velocity loop control using Closed loop Velocity Vector control. These control methods are applicable to most applications, supporting a wide range on industries and specific applications. The 25C-D010N104 is a Frame B drive with Height of 180.0 mm (7.09 inches); Width of 87.0 mm (3.43 inches) and Depth of 172.0 mm (6.77 inches). It supports horizontal and vertical mounting via a DIN rail or direct panel or wall mounting. It also supports Zero stacking, allowing multiple drives to be installed with minimum or zero spacing required between each unit. Top and bottom clearance must be met to ensure adequate air flow for cooling. Top and bottom clearance requirement is 50 mm (2 inches). The 25C-D010N104 operates when supplied with a supply voltage range of 323-528 VAC, 3-Phase. The drive’s output voltage is 0-460 VAC, 3-phase, output power of 4.0 kW or 5.0 HP and current of 10.5 Amperes while the programmable output frequency is 0-590 Hz.

The Allen-Bradley 25C-D010N104 drive is a PowerFlex 527 AC drive and part of the PowerFlex 527 series. This drive has an input voltage of 323 to 528 Volts AC, an output current of 10.5 Amps, a frame size of B. It features an IP 20 / NEMA open enclosure, a Horsepower rating of 5 Horsepower or 4 kilowatts in normal as well as heavy-duty operations at 480 Volts AC. It also features an dual-port EtherNet interface. Designed and intended for use in industrial environments, the drive and its open enclosure and compact size allow for optimum user convenience. However, the 25C-D010N104 PowerFlex 527 AC drive comes with no EMC filter. This drive is intended to work mainly with the Allen-Bradley Logix Programmable Automation Controllers (PACs), thus enabling it to regulate the controller capability and also to use the Studio 5000 Logix designer software to simplify the motor use and development processes. The 25C-D010N104 PowerFlex 527 drive offers an integral dual-port or Ethernet/IP communication option that supports a wide range of topologies and device-level ring functionality. It has a safe torque-off feature which can be applied via an integrated safety or hardwired safety device. The drive also offers an economical solution for various machine parts and applications, including fans, pumps, and conveyors (in-feed and out-feed) which only require simple speed to run the induction motors. The Allen-Bradley 25C-D010N104 PowerFlex 527 drive can transfer the configurations files of the drive to a new machine. It minimizes manual reconfiguration and reduces the downtime via Logix PACs that can identify the replaced drive and enhance the download of all the configuration settings over the dual-port or EtherNet/IP network.