25C-D017N104

The Allen-Bradley 25C-D017N104 is a PowerFlex 527 adjustable frequency AC drive. This device is an electronic device that comes with multiple configurable parameters for full customization of drive’s operation. This drive comes with an integral Ethernet I/P communication interface where drive integration may be implemented. The drive supports premiere integration using Studio 5000 Logix Designer. This drive also supports motion instructions that are similarly used with Allen-Bradley’s Kinetix servo drives. Motion instruction are exclusively used by PowerFlex 527 drives as an increased layer and complexity of support to the premiere integration feature. Additionally, standard software-based configuration may be implemented using Connected Components Workbench (CCW) or DriveTools SP software. The 25C-D017N104 requires an input supply voltage range of 323-528 VAC, 3-phase and input frequency of 47-63 Hz to operate. Output parameters include voltage of 0-575 VAC, 3-Phase; 0-590 frequency output that is fully programmable; Current of 17 Amperes; power of 10.o Horsepower or 7.5 kiloWatts. Supprted control method of the 25C-D017N104 are Basic Volts/Hertz, Volts/Hertz for Fan and Pump applications, Sensorless Vector Control (SVC) and economizer Sensorless Vector Control (SVC) for Frequency control. For position control, Closed loop position Vector control may be used while for Velocity, Closed loop Velocity Vector control is set. This drive also comes with internal Proprotional + Integral (PI) control capability, enabling the drive to control the loop without need of an external controller. The 25C-D017N104 also comes with Three (3) semi-programmable and Four (4) Fully programmable sink / source inputs; Two (2) Form C contacts and One (1) optocoupler output; One (1)Analog input that supports Unipolar –10…10V or One (1) bipolar 0…10V or 4…20 mA signals and Two (2) 0-10VDC; 0-20mA analog output channels.

The Allen-Bradley 25C-D017N104 PowerFlex drive is that is compatible of being paired with any Allen-Bradley Logix controller platform. The drive leverages the controller’s capabilities while using the Studio 5000 Logix Designer. The Logix Designer helps to simplify the machine’s operation and development while minimizing manual reconfiguration. The entire process is a streamlined approach that uses motion instructions shared between Kinetix Servo drives and PowerFlex 527 AC drives. These mechanics are a simulator that provides the same user experience for programming, configuration, and both types of drive control. The 25C-D017N104 AC drive is a PowerFlex 527 AC drive that runs on 480V AC, has an embedded dual-port Ethernet 1IP communication port, Integrated safety, 10HP, 3-phase, 7.5kW normal duty output ratings, an IP20 NEMA/open type enclosure, and a C-sized frame. The 25C-D017N104 PowerFlex AC drive has a 0.4-22kW/0.5.-30HP power rating is standard for 100-600V drives. It also has a safe torque-off feature which may be applied through an integrated safety feature or a hardwired safety feature. The 25C-D017N104 AC drive offers low-cost solutions for machine applications and parts such as fans, pumps, and infeed and outfeed conveyors which use simple speed control on induction motors. Any detected drive that needs replacement can be downloaded via the Ethernet I/P port with all its configuration settings.