25C-D4P0N104

The 25C-D4P0N104 is an Allen-Bradley manufactured electronic device that is part of the PowerFlex 527 product family of Adjustable Frequency AC Drive. More commonly known in the industry as Varibale Frequency Drive or Variable Speed Drive (VSD), the 25C-D4P0N104 enables an application driven by an industrial AC motor to be controlled with modulating speed or torque. Aside from this, the 25C-D4P0N104 may also be configured to implement position and velocity loop control, similar to the control capability of Kinetix Servo drives. The 25C-D4P0N104’s input supply voltage range is 323-528 VAC, 3-Phase. It has an output voltage of 0-460 VAC, 3-Phase and programmable output frequency of 0-590 Hz. Output current is 4.0 Amperes while output power is 2.0 HP or 1.5 kW for both normal and heavy duty-operation. The 25C-D4P0N104 is provided with embedded I/O terminal that supports wiring of a variety of input and output devices. Discrete input channels amount to Three (3) semi-programmable and Four (4) Fully programmable sink / source inputs. These inputs may be connected to pushbutton devices that represent START / STOP / JOG / FORWARD / REVERSE commands. For external speed reference, the 25C-D4P0N104 accommodates Two analog input which is comprised of One (1) Unipolar –10…10V and One (1) bipolar 0…10V or 4…20 mA. The drive also has Two (2) Form C contacts and One (1) optocoupler output outputs that may be used to activate indicating devices for reporting of the drive’s operational status. For speed feedback or re-transmitting of signals to data loggers, analog indicating devices, this drive is also provided with Two (2) 0-10VDC / 0-20mA configurable analog output channels.

The 25C-D4P0N104 module by Allen Bradley is a PowerFlex unit, belonging to the 527 Drive series. This drive does not have an integral EMC filtering with an A sized frame and an Open-type Enclosure (IP20 NEMA rated). The 25C-D4P0N104 is a three-phase module. It is designed be wired with supply voltage range of 323- 528 Volts, putting it in a voltage class of 480 Volts AC, with an input rating of 5.2 kVA and a maximum input current of 5.7 Amps. Its output current is 4.0 Amps and output ratings of 2 HP or 1.5 kW. In total, the 25C-D4P0N104 has a power dissipation of around 80 Watts. Applicable fuses for use with this drive have a minimum rating of approximately 10 and a maximum rating of 15. For communication purposes, the 25C-D4P0N104 has a dual port for Ethernet/IP. Additionally, the 25C-D4P0N104 has a 100-C09 contactor. This unit should not be stored at temperatures higher than 185 degrees Fahrenheit or lower than -40 degrees Fahrenheit. In general, the air surrounding this module should not exceed the maximum temperature of 122 degrees Fahrenheit or drop below -4 degrees Fahrenheit. Additionally, this module should not be mounted higher than 3300 feet at its absolute maximum; mounting it any higher than this will cause the module to begin to derate. The 25C-D4P0N104 drive weighs around 2.4 pounds. Its size is approximately 5.98 x 2.83 x 6.77 inches.