25C-V6P0N104

The Allen-Bradley 25C-V6P0N104 PowerFlex 527 Adjustable Frequency AC Drive is part of the Allen-Bradley PowerFlex 520 Drive series which gives microprocessor control to 3-phase industrial motors in industrial applications with speed control needs. The 25C-V6P0N104 is designed for use with the Allen-Bradley Logix Programmable Automation Controller (PAC), and it features built-in protection, a dual port for the EtherNet/IP port, and a safety over-network feature. It has a single-phase input voltage rating 120V AC at 50/60Hz, with a 6A output current rating, and a heavy-duty power rating of 1.1kW (1.5HP). It has an input tolerance of -15%/+10% at 47 to 63Hz, and it has a power factor of 0.98 across the entire speed range, with a short-circuit rating of 100,000A. The 25C-V6P0N104 provides an AC BUS voltage trip of 150V AC and 75V AC for both the overvoltage and the undervoltage condition, and it gives a microprocessor-controlled overcurrent trip of 200% of the rated output. Its power loss ride thru time is 100ms, with a 2s standard Logic ride-thru time, and it provides a ground fault trip with phase-to-phase protection on the drive output, using the installed MOV. The 25C-V6P0N104 provides selectable motor control from the standard Volt per Hertz control, Sensorless Vector control, and the Sensorless Vector control with an Economizer, and it gives a position loop via the closed-loop vector control, and a velocity loop via the closed-loop vector control with an encoder.

The 25C-V6P0N104 has a programmable carrier frequency range of 2 to 8 kHz, with a frequency accuracy set within ±0.05% of the set output frequency, and it provides exceptional drive performance of ±0.1% of the base speed across a 100: 1-speed range with an encoder. The 25C-V6P0N104 has a programmable control output frequency range of 0 to 590Hz, with a selectable output voltage range of 0 to the rated voltage, and it has multiple stop modes, with software-controlled acceleration and deceleration times. It has a control efficiency of 97.5%, with a heavy-duty overload capacity of 150% for 1 minute and 180% of the rated output for 3s, and it provides Class 10 Electronic Motor Overload Protection. The 25C-V6P0N104 has 4 programmable digital inputs with 24V DC sink/source control that is selectable via a DIP switch, 2 isolated voltage or current analog inputs, 2 programmable (Form A and Form B) relay outputs, and 1 isolated voltage or current analog input, and it has a built-in hardwired safe torque-off with SIL3 Standard. The 25C-V6P0N104 comes has a dynamic braking system, with a standard 5 digit by 16 segment LCD HIM with QuickView-enabled scrolling descriptive text, and it comes with a dual port for Ethernet/IP communication, which supports seamless integration into the Logix environment. It has a non-de-rating operating temperature range of -20 to 50 °C (-4 to 122 °F) at a non-condensing humidity range of 5 to 95%, and its storage temperature range is -40 to 85 °C (-40 to 185 °F). The 25C-V6P0N104 weighs approximately 1.6Kg, with a total volume of 87.0mm x 180.0mm x 172.0mm, and it is RCM, c-UL-us, CE, TUV, KCC, and RoHS certified.