Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley PowerFlex 700S 20DD014A0NYNANBNE

Product image is representative; revision or series may vary. Contact us to request a specific version.

20DD014A0NYNANBNE

|
Need a Specific Revision?

The 20DD014A0NYNANBNE is an AC drive from Allen Bradley’s PowerFlex 700S series. This device operates with an input voltage of 480 V AC and is rated for 3-phase service. It provides a normal duty output of 10 hp and a heavy-duty output of 7.5 hp, while supporting a current rating of 14 A. Its design includes a Brake IGBT for enhanced braking capabilities. Offering environmental resilience, this unit operates within a temperature range of 0°C to 40°C and can function effectively in relative humidity levels ranging from 5% to 95%, non-condensing. The drive has a relatively low protection classification of IP20, suggesting suitability for indoor and controlled environments. However, it does not feature a drive-mounted brake resistor.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 20DD014A0NYNANBNE

ManufacturerAllen Bradley
Product TypeAC Drive
Product LinePowerFlex 700S
Part Number20DD014A0NYNANBNE
Weight20.00 lbs (9.07 kg)
Input Voltage480 V AC
Number of Phases3-Phase
Current Rating14 A
Normal Duty Horsepower10 Hp
Heavy Duty Horsepower7.5 Hp
Protection CategoryIP20
Brake IGBTInstalled
Minimum Temperature Range0°C
Maximum Temperature Range40°C
Humidity Range5 to 95% (non-condensing)
Maximum Operating Altitude1000 meters above sea level
Request a Repair

The Allen Bradley 20DD014A0NYNANBNE AC drive offers a reliable solution tailored for sophisticated motor control applications. Operating on a 3-phase input voltage of 480 V AC, it accommodates a current rating of up to 14 A. For power output, the drive supplies a normal duty performance of 10 horsepower, while heavy-duty scenarios are managed with a rating of 7.5 horsepower.

Integrated within this unit is a Brake IGBT that aids in effective and efficient braking operations. The protection category is designated as IP20, highlighting the need for this drive to be used in indoor environments where atmospheric conditions are controlled.

Temperature variations are critical for operational integrity. Thus, this unit is designed to function optimally within an ambient range from 0°C to 40°C. In terms of humidity, the drive can operate effectively in conditions ranging from 5% to 95%, provided that there is no condensation. The installation can take place at altitudes not exceeding 1000 meters above sea level, ensuring performance remains consistent in various geographical settings.

It should be noted that a drive-mounted brake resistor is not installed in this configuration, which may be a consideration in specific applications requiring additional braking functionality.