20DD2P1A3EYNADNNN

The 20DD2P1A3EYNADNNN PowerFlex 700S Adjustable Frequency Drive with Phase II Control by Allen Bradley is a high performance variable frequency AC drive, designed to provide all round motor control solution for a wide range of industrial applications. This drive, like all powerflex 700S high performance drives, has a structural design that allows a zero stacking configuration, allowance for noise control components, and easy wiring/quick disconnect of control terminal blocks via easy Pull-apart feature. The 20DD2P1A3EYNADNNN has a 3-phase operating voltage of 480 Volt AC, with an output current rating of 2.1 Amps, and it has an overall output power rating of 1.0 HorsePower. It has a recommended input lie range of 325 to 528 Volt AC at 47 to 63 Hertz line input frequency range, and it also has a recommended drive to motor power ratio which must exceed 2:1. The 20DD2P1A3EYNADNNN has built-in voltage regulation feature, with a very fast acting current limiting capability, and it has built-in MOVs (Metal Oxide Varistors) across the circuit, which provide protection against transient voltage spike up to 6000 Volts. With specified/recommended circuit breaker and fuse, this drive is suitable for a circuit capable of delivering a maximum of 200,000 Amps short-circuit rating, and it has microprocessor temperature control at the heat sink, thereby preventing overload.

The 20DD2P1A3EYNADNNN can be programmed for either Field Oriented motor Control or the permanent magnet motor control, and it utilizes sine coded pulse width modulated (PWM) output with carrier frequency adjustable up to 10 Kilohertz. It has programmable acceleration and deceleration times, programmed separately from 0 to 6553.5 seconds in 0.1-second increments. It has an output frequency adjustable from 0 to 400 Hertz, and an adjustable 3-phase output voltage selectable from 0 to rated motor voltage. It has current limit capability programmable up to 800% of rated output current, and it provides Class 10 Electronic motor overload protection. The 20DD2P1A3EYNADNNN can be programmed and configured easily via a full numeric LCD display HMI (Human-Module Interface) option, connected via a DeviceNet enabled DPI interface. This communication interface option provides quick and reliable data exchange with host controllers. It has a NEMA Type 1 rated enclosure and an operating temperature range of 0 to 40 degree Celsius (32 to 104 degree Fahrenheit) around a 5% to 95% relative humidity range. The 20DD2P1A3EYNADNNN weighs approximately 9.98 Kilograms, with total dimensions of 135 x 136 x 200 millimeters, and it is ATEX, C-TICK, c-UL-us, CE, and TUV certified.