Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley PowerFlex 700S 20DD300A3ENNBNANE

Product image is representative; revision or series may vary. Contact us to request a specific version.

20DD300A3ENNBNANE

|

The Allen-Bradley 20DD300A3ENNBNANE Adjustable Frequency AC Drive operates with a 480V AC Voltage, 3 Phases, and 300 480V Input Amps. It has a IP20, NEMA Type 1 Enclosure and a Full Numeric LCD Human Interface Machine.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 20DD300A3ENNBNANE

ManufacturerAllen Bradley
Product TypeAdjustable Frequency AC Drive
Product LinePowerFlex 700S
Part Number20DD300A3ENNBNANE
Weight120.00 lbs (54.43 kg)
Voltage480V AC
Phases3
480V Input Amps300
EnclosureIP20, NEMA Type 1
Human Interface MachineFull Numeric LCD
DocumentationQuick Start Guide
BrakeNo
Bus Undervoltage TripAdjustable
Heat Sink ThermistorMonitored by microprocessor overtemp trip
Logic Control Ride-Thru0.25 sec., drive not running
Power Ride-Thru15 milliseconds at full load

The Allen Bradley 20DD300A3ENNBNANE Adjustable Frequency AC Drive with Phase II Control is a Digital AC drive in the family of Allen Bradley PowerFlex 700S series of high performance, and self-diagnosing drives, which provide all-around motor control in a variety of industrial application. The 20DD300A3ENNBNANE offers users robust transient protection of up to Volt using factory installed MOVs (Metal Oxide Varistors), and it is capable of delivering up to 200,000 Amps (RMS) line protection using specified standard fuses and circuit breakers. It has a 6-pulse, 3-phase voltage rating of 480 Volt AC, with -/+10% (of rated nominal input) acceptable input range at 47 to 63 Hertz, and it output ratings of 300 Amps, and 250 HorsePower. It has a 0.98 power factor, with a 97.5 operating efficiency, and it has a power ratio of 2:1 (recommended drive to power). The 20DD300A3ENNBNANE offers a fast-acting current limit (programmable to up to 800% of rated output), with efficient voltage regulation capability, and it also provides efficient over temperature control via microprocessor control trip at the heat sink. It can also provide Class 10 rated electronic motor overload protection, and it is designed to ride faultlessly through 15 milliseconds power outage.

The 20DD300A3ENNBNANE offers efficient Field Oriented type control (without encoder feedback), and it can also be programmed for permanent magnet motor control. It produces a sine coded pulse width modulation output with programmable carrier frequency, adjustable up to 10 KiloHertz, and it has adjustable output frequency with a range within 0 to 400 Hertz. It has 3-phase output, adjustable from 0 to rated motor voltage, and it offers multiple stop modes with independently programmed acceleration/deceleration time. The 20DD300A3ENNBNANE is programmed easily through a full numeric, texts display HMI (Human-Module Interface), and unlike most PowerFlex 700S drive, this drive does not come with internal communication interface option. It has a 1nrma Type 1 enclosure and operates within a temperature limit of 0 to 40 degree Celsius (32 to 104 degree Fahrenheit) without de-rating. The 20DD300A3ENNBNANE has an average weight of 143 Kilogram, with a shipping volume of 1150 x 480 x 363.3 millimeters, and it is CE, ATEX, c-UL-us, TUV, and C-TICK certified.

Revision Part #Also known as
20DD300A3ENNBNANE Ser A20DD300A3ENNBNANE/A, Series A, Rev A
Don't see your particular revision? Contact us now.