Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley PowerFlex 700S 20DD500A3ENNBNASE

Product image is representative; revision or series may vary. Contact us to request a specific version.

20DD500A3ENNBNASE

|

The Allen-Bradley 20DD500A3ENNBNASE Adjustable Frequency AC Drive operates with a 480V AC Voltage, 3 Phases, and 500 480V Input Amps. It has a IP20, NEMA Type 1 Enclosure and a Full Numeric LCD Human Interface Machine.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 20DD500A3ENNBNASE

ManufacturerAllen Bradley
Product TypeAdjustable Frequency AC Drive
Product LinePowerFlex 700S
Part Number20DD500A3ENNBNASE
Weight32.00 lbs (14.51 kg)
Voltage480V AC
Phases3
480V Input Amps500
EnclosureIP20, NEMA Type 1
Human Interface MachineFull Numeric LCD
DocumentationQuick Start Guide
BrakeNo
Bus Undervoltage TripAdjustable
Heat Sink ThermistorMonitored by microprocessor overtemp trip
Logic Control Ride-Thru0.25 sec., drive not running
Power Ride-Thru15 milliseconds at full load

The Allen Bradley 20DD500A3ENNBNASE Adjustable Frequency AC Drive is a digitally programmed AC drive in the PowerFlex 700S series of high performance and self-diagnosing drives, designed to provide an excellent motor in a variety of demanding industrial applications. This drive provides easy programming, self-diagnosing, and an easy start procedure via DPI connected HMI with a full numeric keypad, and a 7 line by 21 character LCD display. It has a 3-phase direct line connection, with an operating voltage of 480 Volt AC, and it has an acceptable input range of 325 to 528 Volt AC at 47 to 93 Hertz. The 20DD500A3ENNBNASE has a drive rating of 450 HorsePower, a 500 Amp current rating at 460 Volt AC input, and it has a displacement power factor of 0.98 across entire speed range. This drive is designed with built-in protective features such as voltage regulation, fast acting current limiting, microprocessor temperature control, and self-diagnosing capability for excellent operation. For additional protection, the 20DD500A3ENNBNASE has MOVs across it entire circuit for ground fault protection, and its circuit is designed to withstand up 200,000 Amps (RMS) maximum short-circuit rating using recommended fuses and circuit breakers. It features multiple motor control algorithms for flexibility of control, and output control is achieved via sinusoidal PWM (Pulse Width Modulated) signal with an adjustable carrier frequency.

The 20DD500A3ENNBNASE produces a 3-phase out, adjustable from 0 to rated motor voltage, and it has a programmable output frequency adjustable from 0 to 400 Hertz. This drive offers multiple stop modes, with 2 independently programmable acceleration and deceleration time, and it provides Class 10 Motor Overload protection. It has a CE rated line Filtering option, with a Safety Torque OFF encoder feedback device for enhanced control, and like all PowerFlex 700S drives, it is designed with Phase II control capability. It has an expanded cassette design, with a NEMA Type 1 conformally coated enclosure, and it has an ambient operating range of 0 to 40 degree Celsius (32 to 104 degree Fahrenheit). The 20DD500A3ENNBNASE has a total volume of 2275 x 597 x 633 millimeters, and it has CE, c-UL-us, ATEX, TUV, and C-TICK certifications.

Revision Part #Also known as
20DD500A3ENNBNASE Ser A20DD500A3ENNBNASE/A, Series A, Rev A
Don't see your particular revision? Contact us now.