Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley PowerFlex 700S 20DT144A0NNNACANE

Product image is representative; revision or series may vary. Contact us to request a specific version.

20DT144A0NNNACANE

|
Need a Specific Revision?

The Allen-Bradley/Rockwell Automation 20DT144A0NNNACANE PowerFlex 700S drive includes an IP 20 enclosure. This enclosure can be turned into an open enclosure by just removing an adhesive label that is located on top of the drive. This drive operates with a voltage of 810 Volts DC and it has a DPI ControlNet communication slot.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 20DT144A0NNNACANE

ManufacturerAllen Bradley
CategoryDrives
Product LinePowerFlex 700S
Part Number20DT144A0NNNACANE
Weight32.00 lbs (14.51 kg)
TypeDrive
Voltage Rating810V DC
ND Rating144 Amps, 150 HP
EnclosureIP 20, NEMA Type 1
HMIBlank Cover
Brake ResistorNone
DocumentationNone
CE Filter/CM ChokeYes
FeedbackNone
Comm SlotDPI ControlNet (Coax)
Request a Repair

The 20DT144A0NNNACANE drive is a PowerFlex drive that has been designed by Allen-Bradley/Rockwell Automation and included in the PowerFlex 700S series of AC drives. This specific PowerFlex drive is intended to be used in machine control applications that involve the use of industrial motors. Certain conditions must be met to ensure proper operations with this drive. First, the drive needs to be installed in a controlled environment and with vertical clearances of at least 5 inches around it. The drive needs to be included in a grounding system that helps diminish electromagnetic interference during operations. The Allen-Bradley/Rockwell Automation 20DT144A0NNNACANE PowerFlex drive operates with a voltage range of 810 Volts DC and a normal duty output power rating of 144 Amps and 150 Horsepower.

The operating environment needs to be considered carefully when installing the Allen-Bradley/Rockwell Automation 20DT144A0NNNACANE PowerFlex 700S drive. Cables need to be kept as short as possible and filters need to be used in ungrounded systems. The use of circuit breakers and/or fuses is also recommended. The Allen-Bradley/Rockwell Automation 20DT144A0NNNACANE PowerFlex drive comes with an IP 20 enclosure that can be easily converted into an IP 00 open enclosure. This can be done by removing the adhesive label that is located on top of the drive. Once this conversion has been made, the drive will be able to operate at temperatures of up to 50 degrees Celsius without needing to derate its specifications. The drive comes with a DPI ControlNet communications module and it does not include a human-machine interface or a brake resistor. Both of these components can be added if necessary.