20G21FD3P4JA0NNNNN

The Allen-Bradley 20G21FD3P4JA0NNNNN motor control drive is an AC and DC-powered industrial drive. It belongs to the Allen-Bradley PowerFlex 755TS product line. The 20G21FD3P4JA0NNNNN drive is a flange-mounted device. The front of the drive is IP 20 rated and it has an open type of NEMA/UL enclosure. The back side of the drive has an IP 66 protection rating and it also has a NEMA/UL Type 4X enclosure. The 20G21FD3P4JA0NNNNN drive’s AC input voltage rating is 480 Volts AC. It can support both 3-phase and 1-phase AC input voltage. The 20G21FD3P4JA0NNNNN drive’s full rated output power is only possible with 3-phase AC input. The rated output power is 2 Horsepower in the normal-duty operating mode and 1.5 Horsepower in the heavy-duty operating mode. The rated continuous current output in the normal-duty operating mode is 3.4 Amps, and the output current can reach up to 3.7 Amps for 1 minute and 5.1 Amps for 3 seconds.

For heavy-duty operation, the rated continuous output current of the Allen-Bradley 20G21FD3P4JA0NNNNN PowerFlex 755TS series motor control drive is 2.1 Amps, and the current can reach up to 3.7 Amps for 1 minute and 5.1 Amps for 3 seconds. The DC input voltage rating of the drive is 650 Volts DC and the drive includes DC terminals. The frame size of the drive is Size 1. The enclosure of the drive provides it with standard protection in standard industrial environments. The drive has a CM jumper. The 20G21FD3P4JA0NNNNN drive also comes with a DB transistor, but it does not include an optional HMI module. The maximum efficiency rating of the 20G21FD3P4JA0NNNNN drive is 97.5% at the rated current and nominal line voltage. The DC link impedance rating is less than 4% and the maximum short circuit rating is 100,000 Amps RMS. The drive is meant to be installed vertically. Proper separation between the drive and other devices is required for smooth airflow and proper heat dissipation.