Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley PowerFlex 755TS 20G21RC015JA0NNNNN

Product image is representative; revision or series may vary. Contact us to request a specific version.

20G21RC015JA0NNNNN

|

The Allen-Bradley 20G21RC015JA0NNNNN PowerFlex 755TS series drive is a motor control drive. Its rated current output is 15.4 Amps. The 20G21RC015JA0NNNNN drive supports dual Ethernet communication through 2 communication ports.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 20G21RC015JA0NNNNN

ManufacturerAllen Bradley
Product TypeMotor Control Drive
Product LinePowerFlex 755TS
Part Number20G21RC015JA0NNNNN
Weight50.00 lbs (22.68 kg)
Current Output15.4 Amps
Power Output7.5 kilowatts
HMINone
HeatsinkYes
Cooling MethodForced Air
CommunicationsDual Ethernet Ports
DC TerminalsYes
Input Voltage400 Volts AC/540 Volts DC
Frame Size1

The Allen-Bradley 20G21RC015JA0NNNNN motor control drive is an industrial drive with variable frequency from the PowerFlex 755TS series. It is designed for AC or DC input voltage. The drive includes DC terminals and its DC input rating is 540 Volts DC. The 20G21RC015JA0NNNNN drive also supports 400 Volts AC input. Either 3-phase or single-phase AC mains power supplies can be connected to the drive input. However, it is important to note that operation with single-phase AC input leads to derating of the drive output. The continuous current output of the 20G21RC015JA0NNNNN drive is 15.4 Amps. The rated output power for the drive with 3-phase input depends on its operating mode. The output power rating is 7.5 kilowatts for normal duty operation and 5.5 kilowatts for heavy-duty operation. The rated power and current output with single-phase AC input are 4 kilowatts and 8.7 Amps, respectively.

The frame size of the Allen-Bradley 20G21RC015JA0NNNNN PowerFlex 755TS series motor control drive is Size 1. Even though the nominal AC input voltage rating is 400 Volts AC, the drive operates at voltages ranging from 342 to 528 Volts AC. The full AC power range for the 20G21RC015JA0NNNNN drive is 400 to 528 Volts DC. The nominal voltage rating at the drive output is 380 Volts AC. The external Watts loss rating for the drive is 166 Watts. The internal Watts loss rating for the drive is 80 Watts. Hence, the total Watts loss rating for the drive is 246 Watts. The 20G21RC015JA0NNNNN drive is an open drive with an IP 20 protection rating. The minimum ambient operating temperature rating is -20 degrees Celsius and the maximum ambient operating temperature rating is 50 degrees Celsius. The 20G21RC015JA0NNNNN drive relies on forced air cooling to avoid overheating. An HMI module is not part of the drive package.