20G21RD014JA0NNNNN

The Allen-Bradley 20G21RD014JA0NNNNN motor control drive is a PowerFlex 755TS series motor control drive. It is deployed for motor control in both commercial and industrial applications and it can support AC and DC voltage. The 20G21RD014JA0NNNNN drive is designed for connection to 3-phase or single-phase AC systems when it uses AC voltage, but the drive only delivers its full rated output with 3-phase AC input. The AC input voltage rating is 480 Volts AC and the DC input voltage rating is 650 Volts DC. The 20G21RD014JA0NNNNN drive is supplied with DC terminals. The normal duty output rating is 10 Horsepower and the heavy-duty output rating is 7.5 Horsepower. The 20G21RD014JA0NNNNN drive has a compact NEMA/UL enclosure. The frame size of the drive is Size 1. The protection rating for the front of the drive is IP 20. The protection rating for the back of the drive is IP 00.

The Allen-Bradley 20G21RD014JA0NNNNN PowerFlex 755TS series motor control drive is designed for forced air cooling. The minimum rate of airflow recommended by Allen-Bradley is 50 CFM. The minimum recommended mounting clearance above and below the drive is 3 inches or 76.2 millimeters. The 20G21RD014JA0NNNNN drive does not feature an HMI module. However, a keypad and digital display on the front panel of the drive enables basic drive configuration and monitoring. Two Gigabit Ethernet ports enable fast communication and drive deployment in a ring topology. The major benefit of the ring topology is redundancy: connected nodes on the ring continue to communicate even if a cable gets damaged or if a single node is disabled. The drive features a heatsink and it dissipates 233 Watts of energy as heat. The weight of the 20G21RD014JA0NNNNN drive is approximately 6 kilograms. The dimensions of the drive are 400 x 109 x 211.1 millimeters.