Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley PowerFlex 755TS 20G24GD186JA0NNNNN

Product image is representative; revision or series may vary. Contact us to request a specific version.

20G24GD186JA0NNNNN

|
Need a Specific Revision?

The 20G24GD186JA0NNNNN drive is a CE-certified Allen-Bradley/Rockwell Automation motor control drive. The drive is part of the PowerFlex 755TS series and it is built for 480 Volts AC or 650 Volts DC of rated voltage. The 20G24GD186JA0NNNNN drive has a current rating of 186 Amps and an output power rating of 150 Horsepower.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 20G24GD186JA0NNNNN

ManufacturerAllen Bradley
CategoryDrives
Product LinePowerFlex 755TS
Part Number20G24GD186JA0NNNNN
Weight200.00 lbs (90.72 kg)
Corrosive Gas Protection and Cooling TypeStandard Protection, Forced Air
Input TypeDC Input with Precharge
EnclosureIP 54, NEMA/UL Type 12
Voltage Rating480 Volts AC, 650 Volts DC
Current Rating186 Amps
Power Rating150 Horsepower
Filtering and CM Cap ConfigurationDefault CM Cap Connection (Jumper Installed), Filtering Included
Dynamic BrakingInternal Transistor, No Internal Resistor
Human Machine Interface (HMI)No HMI
CertificationsCE, c-UL-us, EAC, EMC, KCC, RCM, SEMI F47, etc
Request a Repair

The 20G24GD186JA0NNNNN motor control drive has been designed and manufactured by Allen-Bradley/Rockwell Automation to control the position, acceleration, deceleration, and torque of motors in industrial systems. It uses variable frequency and a variety of advanced control technology to control the connected motor. The 20G24GD186JA0NNNNN drive is part of the PowerFlex 755TS series and it is a drive that can be used for multiple motor control applications in complex control systems that operate on a high level for extended periods of time. The drive has an output power rating of 150 Horsepower and a 97.5% maximum efficiency rating at the rated current of 186 Amps. The voltage rating of the 20G24GD186JA0NNNNN drive is 480 Volts AC or 650 Volts DC, it uses a 3-phase power source for its AC voltage, and it tolerates up to +/-10% of nominal bus voltage for its DC input voltage.

The Allen-Bradley/Rockwell Automation 20G24GD186JA0NNNNN PowerFlex 755TS series motor control drive has a brake IGBT rating of 100% torque and a current draw rating of 5 Amps for the control POD. The drive has an IP 54 rated protective enclosure and a Size 7 frame. The 20G24GD186JA0NNNNN drive can be used for normal-duty and heavy-duty motor control applications in various conditions. Additionally, the drive has an intermittent overload rating of 110 to 150% for normal-duty applications and an intermittent overload rating of 150 to 180% for heavy-duty applications. The 20G24GD186JA0NNNNN drive has an adjustable S-curve time and it offers different stop modes for stopping the connected motor without friction or sudden changes in speed. The torque accuracy of the drive is around 1.2% and the speed control procedure can be performed with or without feedback.