Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley PowerFlex 755TS 20G24NC085JA0NNNNN

Product image is representative; revision or series may vary. Contact us to request a specific version.

20G24NC085JA0NNNNN

|
Need a Specific Revision?

The Allen-Bradley 20G24NC085JA0NNNNN motor control drive is a PowerFlex 755TS series drive. It does not feature an HMI module. However, the 20G24NC085JA0NNNNN drive features a heatsink for improved heat dissipation.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 20G24NC085JA0NNNNN

ManufacturerAllen Bradley
Product TypeMotor Control Drive
Product LinePowerFlex 755TS
Part Number20G24NC085JA0NNNNN
Weight200.00 lbs (90.72 kg)
Input Voltage400 Volts AC, 540 Volts DC
Frame Size5
Current Output85 Amps
HeatsinkYes
HMINone
CommunicationGigabit Ethernet
Power Output45 kilowatts
Operating Temperature-4 to 122 degrees Fahrenheit
Request a Repair

The Allen-Bradley 20G24NC085JA0NNNNN drive is a PowerFlex 755TS series motor control drive. Its frame size is Size 5. The shipping weight of the drive is approximately 21 kilograms. The height of the 20G24NC085JA0NNNNN is 550 millimeters, the width is 270 millimeters, and the depth is 212 millimeters. There are 4 mounting holes on the open drive enclosure. The diameter of each mounting hole is 14.3 millimeters. The protection rating of the front side of the 20G24NC085JA0NNNNN is IP 20, and the protection rating of the back side is IP 00. The drive must be mounted in a vertical orientation and it must make full contact with the mounting surface. The drive’s vertical clearance requirements are 76.2 millimeters above and below the drive. The operating temperature range of the 20G24NC085JA0NNNNN drive is -4 to 122 degrees Fahrenheit. The temperature at the air inlet must not exceed the product specifications.

The Allen-Bradley 20G24NC085JA0NNNNN PowerFlex 755TS series motor control drive features a heatsink. The airflow through this heatsink should not be impeded. The drive cools down via forced air cooling and the required airflow is 520 CFM or 883 cubic meters per hour. The 20G24NC085JA0NNNNN drive is designed for 400 Volts AC or 540 Volts DC of input voltage. It supports DC input with precharge. The continuous output current rating with 3-phase AC input is 85 Amps. The continuous output current with single-phase AC input is 43 Amps. The normal-duty power output rating is 45 kilowatts, and the heavy-duty power output rating is 37 kilowatts. The 20G24NC085JA0NNNNN drive does not feature a HMI module, but Allen-Bradley provides optional HMI modules that users can install in the field. The drive features a DB transistor. Only trained personnel should install the drive.