20G24NC367JA0NNNNN

The Allen-Bradley 20G24NC367JA0NNNNN PowerFlex 755TS series motor control drive is a digital drive that works with either AC or DC input. The drive supports DC input with pre-charge and it operates at 540 Volts DC voltage. The 20G24NC367JA0NNNNN drive also supports 3-phase and single-phase 400 Volts AC input voltage. Note that 3-phase AC voltage supports the full rated drive output and single-phase AC voltage only supports derated output. The full rated output specifications for the 20G24NC367JA0NNNNN drive include 367 Amps of continuous current, 200 kilowatts of normal duty power output, and 160 kilowatts of heavy-duty power output. The derated output specifications for the drive include 170 Amps of current output and 90 kilowatts of power output. The frame size of the drive is Size 6 and the drive’s approximate weight is 105 pounds. The approximate drive dimensions are 665 x 308 x 208.4 millimeters. To open the rear door, a space of at least 346.4 millimeters behind the drive is required.

The Allen-Bradley 20G24NC367JA0NNNNN PowerFlex 755TS series motor control drive mounts vertically. Four holes on the enclosure support secure mounting to a flat vertical surface. For optimal operation, the drive requires an ambient temperature range of -4 to 122 degrees Fahrenheit. The maximum operating temperature supported by the 20G24NC367JA0NNNNN drive with derating is 140 degrees Fahrenheit. The required airflow for suitable heat dissipation is 504 CFM. The storage temperature range for the drive is from -40 to 158 degrees Fahrenheit. The 20G24NC367JA0NNNNN drive does not include a built-in HMI, but does include a digital display and keypad that the operators can use to monitor drive operation and make suitable adjustments to its operating parameters. Only trained professionals should install the drive. This will minimize the risk of wiring errors and other types of installation errors that can affect drive’s performance negatively.