20G2AGD125JN0NNNNN | Allen Bradley Drives PowerFlex 755TS

20G2AGD125JN0NNNNN

20G2AGD125JN0NNNNN

Description:

The 20G2AGD125JN0NNNNN motor control drive is a PowerFlex 755TS series drive designed and manufactured by Allen-Bradley/Rockwell Automation. The drive has a voltage rating of 480 Volts AC or 650 Volts DC and an output power rating of 100 Horsepower. The 20G2AGD125JN0NNNNN drive supports a current output rating of 125 Amps and it is enclosed in an IP 54 (NEMA/UL Type 12) enclosure.

Rated 5 with 12 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Call

Submit RFQ for 20G2AGD125JN0NNNNN

Add more parts to quote

Description:

The 20G2AGD125JN0NNNNN motor control drive is a PowerFlex 755TS series drive designed and manufactured by Allen-Bradley/Rockwell Automation. The drive has a voltage rating of 480 Volts AC or 650 Volts DC and an output power rating of 100 Horsepower. The 20G2AGD125JN0NNNNN drive supports a current output rating of 125 Amps and it is enclosed in an IP 54 (NEMA/UL Type 12) enclosure.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 20G2AGD125JN0NNNNN.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 5 with 12 reviews

    Technical Specifications for 20G2AGD125JN0NNNNN

BrandAllen-Bradley / Rockwell Automation
SeriesPowerFlex 755TS
Part Number20G2AGD125JN0NNNNN
Corrosive Gas Protection and Cooling TypeStandard Protection, Forced Air
Input TypeAC Input With Precharge, No DC Terminals
EnclosureIP 54, NEMA/UL Type 12
Voltage Rating480 Volts AC, 650 Volts DC
Current Rating125 Amps
Power Rating100 Horsepower
Filtering and CM Cap ConfigurationDefault CM Cap Connection (Jumper Installed), Filtering Included
Dynamic BrakingNo Internal Resistor, No Internal Transistor
Human Machine Interface (HMI)No HMI
CertificationsCE, c-UL-us, EAC, EMC, KCC, RCM, SEMI F47, etc.
BrandAllen-Bradley / Rockwell Automation
SeriesPowerFlex 755TS
Part Number20G2AGD125JN0NNNNN
Corrosive Gas Protection and Cooling TypeStandard Protection, Forced Air
Input TypeAC Input With Precharge, No DC Terminals
EnclosureIP 54, NEMA/UL Type 12
Voltage Rating480 Volts AC, 650 Volts DC
Current Rating125 Amps
Power Rating100 Horsepower
Filtering and CM Cap ConfigurationDefault CM Cap Connection (Jumper Installed), Filtering Included
Dynamic BrakingNo Internal Resistor, No Internal Transistor
Human Machine Interface (HMI)No HMI
CertificationsCE, c-UL-us, EAC, EMC, KCC, RCM, SEMI F47, etc.
s

About 20G2AGD125JN0NNNNN

The 20G2AGD125JN0NNNNN motor control drive is produced by Allen-Bradley/Rockwell Automation in the PowerFlex 755TS series and it is capable of handling different types of motor loads. The motor control technology used in the drive can be used for swinging, moving, accelerating, decelerating, stabilizing, and otherwise manipulating motors and their components. The 20G2AGD125JN0NNNNN drive has protective features that can protect both personnel and equipment, and these protective features can also extend the operating life of the system components. The drive is designed to save energy when it is operating with small motor loads. Its energy-saving technology is more efficient than mechanical braking or other older methods of energy reduction. The 20G2AGD125JN0NNNNN drive is considered to be a smart device with advanced configuration procedures that can be completed in a short period of time. The drive provides a high level of consistent performance due to its real-time and predictive diagnostic features.



The Allen-Bradley/Rockwell Automation 20G2AGD125JN0NNNNN PowerFlex 755TS series motor control drive is rated at 125 Amps of output current and it can operate at a voltage rating of 480 Volts AC or 650 Volts DC. The drive has a standard forced-air cooling option and the default protective features for corrosive gas protection. The majority of parts in the 20G2AGD125JN0NNNNN drive are modular in some way and the slot-based design of the drive allows for the easy integration of additional features. The 20G2AGD125JN0NNNNN drive has a nominal power output rating of 100 Horsepower and it includes a filtering option. Additionally, the drive includes a jumper installed at its default CM cap connection. The 20G2AGD125JN0NNNNN motor control drive does not come with a human-machine interface.



Repair Services for 20G2AGD125JN0NNNNN

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 20G2AGD125JN0NNNNN. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 20G2AGD125JN0NNNNN

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 20G2AGD125JN0NNNNN

Resolutions For 20G2AGD125JN0NNNNN

About

Technical Specifications for 20G2AGD125JN0NNNNN

BrandAllen-Bradley / Rockwell Automation
SeriesPowerFlex 755TS
Part Number20G2AGD125JN0NNNNN
Corrosive Gas Protection and Cooling TypeStandard Protection, Forced Air
Input TypeAC Input With Precharge, No DC Terminals
EnclosureIP 54, NEMA/UL Type 12
Voltage Rating480 Volts AC, 650 Volts DC
Current Rating125 Amps
Power Rating100 Horsepower
Filtering and CM Cap ConfigurationDefault CM Cap Connection (Jumper Installed), Filtering Included
Dynamic BrakingNo Internal Resistor, No Internal Transistor
Human Machine Interface (HMI)No HMI
CertificationsCE, c-UL-us, EAC, EMC, KCC, RCM, SEMI F47, etc.
BrandAllen-Bradley / Rockwell Automation
SeriesPowerFlex 755TS
Part Number20G2AGD125JN0NNNNN
Corrosive Gas Protection and Cooling TypeStandard Protection, Forced Air
Input TypeAC Input With Precharge, No DC Terminals
EnclosureIP 54, NEMA/UL Type 12
Voltage Rating480 Volts AC, 650 Volts DC
Current Rating125 Amps
Power Rating100 Horsepower
Filtering and CM Cap ConfigurationDefault CM Cap Connection (Jumper Installed), Filtering Included
Dynamic BrakingNo Internal Resistor, No Internal Transistor
Human Machine Interface (HMI)No HMI
CertificationsCE, c-UL-us, EAC, EMC, KCC, RCM, SEMI F47, etc.

About 20G2AGD125JN0NNNNN

The 20G2AGD125JN0NNNNN motor control drive is produced by Allen-Bradley/Rockwell Automation in the PowerFlex 755TS series and it is capable of handling different types of motor loads. The motor control technology used in the drive can be used for swinging, moving, accelerating, decelerating, stabilizing, and otherwise manipulating motors and their components. The 20G2AGD125JN0NNNNN drive has protective features that can protect both personnel and equipment, and these protective features can also extend the operating life of the system components. The drive is designed to save energy when it is operating with small motor loads. Its energy-saving technology is more efficient than mechanical braking or other older methods of energy reduction. The 20G2AGD125JN0NNNNN drive is considered to be a smart device with advanced configuration procedures that can be completed in a short period of time. The drive provides a high level of consistent performance due to its real-time and predictive diagnostic features.



The Allen-Bradley/Rockwell Automation 20G2AGD125JN0NNNNN PowerFlex 755TS series motor control drive is rated at 125 Amps of output current and it can operate at a voltage rating of 480 Volts AC or 650 Volts DC. The drive has a standard forced-air cooling option and the default protective features for corrosive gas protection. The majority of parts in the 20G2AGD125JN0NNNNN drive are modular in some way and the slot-based design of the drive allows for the easy integration of additional features. The 20G2AGD125JN0NNNNN drive has a nominal power output rating of 100 Horsepower and it includes a filtering option. Additionally, the drive includes a jumper installed at its default CM cap connection. The 20G2AGD125JN0NNNNN motor control drive does not come with a human-machine interface.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 20G2AGD125JN0NNNNN. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 20G2AGD125JN0NNNNN. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF