20G2AGD361JN0NNNNN

The Allen-Bradley 20G2AGD361JN0NNNNN drive is a motor control drive from the PowerFlex 755TS series. It is designed to operate at 480 Volts AC or at 650 Volts DC. Even though the drive’s maximum rated output is only available with 3-phase input voltage, the drive also supports single-phase input with derated output. The continuous current rating at the output of the 20G2AGD361JN0NNNNN drive is 361 Amps. The normal duty power output rating of the drive is 300 Horsepower. The heavy-duty power output rating of the drive is 250 Horsepower. The drive supports AC input with precharge. The drive does not include DC terminals. The housing of the 20G2AGD361JN0NNNNN drive is NEMA Type 12 housing. The protection rating of the housing is IP 54, which means that the drive is protected against dust, and it is also protected against water sprayed from all directions.

The cooling method for the Allen-Bradley 20G2AGD361JN0NNNNN PowerFlex 755TS series motor control drive is forced air cooling with a minimum of 756 CFM of required airflow. The total heat dissipation rating of the drive is 4025 Watts. Allen-Bradley recommends a minimum of 76.2 millimeters of vertical spacing between adjacent PowerFlex 755TS drives. Even though the 20G2AGD361JN0NNNNN drive is supplied without an HMI module, a keypad/display on the front panel allows for basic monitoring and configuration. The frame size of the 20G2AGD361JN0NNNNN drive is Size 7. The drive weight is 132 kilograms and its dimensions are 1614 x 609.6 x 464.8 millimeters. If the users need to open the rear door, the total required installation depth behind the drive is 1058.4 millimeters so that the door can be opened completely. The diameter of each of the 4 mounting holes on the drive housing is 22 millimeters. The drive must be mounted on a flat vertical surface. Installation by trained professionals minimizes the risk of wiring errors and other installation errors.