20G2ANC140JN0NNNNN | Allen Bradley Drives PowerFlex 755TS

20G2ANC140JN0NNNNN

20G2ANC140JN0NNNNN

Description:

The Allen-Bradley 20G2ANC140JN0NNNNN motor control drive is an industrial motor control drive from the PowerFlex 755TS series. Its input voltage ratings are 400 Volts AC or 540 Volts DC. The 20G2ANC140JN0NNNNN drive does not include DC terminals.

Rated 4.6 with 16 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Call

Submit RFQ for 20G2ANC140JN0NNNNN

Add more parts to quote

Description:

The Allen-Bradley 20G2ANC140JN0NNNNN motor control drive is an industrial motor control drive from the PowerFlex 755TS series. Its input voltage ratings are 400 Volts AC or 540 Volts DC. The 20G2ANC140JN0NNNNN drive does not include DC terminals.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 20G2ANC140JN0NNNNN.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 16 reviews

    Technical Specifications for 20G2ANC140JN0NNNNN

BrandAllen-Bradley / Rockwell Automation
SeriesPowerFlex 755TS
Part Number20G2ANC140JN0NNNNN
Product TypeMotor Control Drive
MountingVertical
Input Voltage400 Volts AC, 540 Volts DC
Current Output140 Amps
Power Output75 kilowatts
CoolingForced Air
Enclosure TypeOpen
Operating Temperature-4 to 122 degrees Fahrenheit
CommunicationDual Ethernet
Frame Size6
BrandAllen-Bradley / Rockwell Automation
SeriesPowerFlex 755TS
Part Number20G2ANC140JN0NNNNN
Product TypeMotor Control Drive
MountingVertical
Input Voltage400 Volts AC, 540 Volts DC
Current Output140 Amps
Power Output75 kilowatts
CoolingForced Air
Enclosure TypeOpen
Operating Temperature-4 to 122 degrees Fahrenheit
CommunicationDual Ethernet
Frame Size6
s

About 20G2ANC140JN0NNNNN

The 20G2ANC140JN0NNNNN drive is a motor control drive from the Allen-Bradley PowerFlex 755TS product line. The drive supports multiple motor control algorithms. One of these is patented Allen-Bradley TotalForce technology that supports the precise control of the motor speed, position, and torque. TotalForce technology incorporates several patented features that optimize industrial control systems for high productivity. The input voltage rating of the 20G2ANC140JN0NNNNN drive is 400 Volts AC (3-phase) or 540 Volts DC. The drive supports AC input with precharge but it does not include DC terminals. The output current rating of the drive is 140 Amps. The output power ratings of the 20G2ANC140JN0NNNNN drive are 75 kilowatts in the normal duty mode and 55 kilowatts in the heavy-duty mode. The drive output derates with single-phase AC input voltage. With single-phase AC input voltage, the current output falls to 72 Amps and the power output falls to 37 kilowatts.



The Allen-Bradley 20G2ANC140JN0NNNNN PowerFlex 755TS series motor control drive comes in an open enclosure. The protection rating of the drive’s front panel is IP 20 and the protection rating of the rear portion of the drive is IP 00. The drive operates optimally at temperatures between -4 and 122 degrees Fahrenheit. Drive operation with derated output is also possible at temperatures of up to 140 degrees Fahrenheit. An unused 20G2ANC140JN0NNNNN drive should be stored in an environment with an ambient temperature range of -40 to 158 degrees Fahrenheit. The drive includes dual Gigabit Ethernet ports for high-speed network communication. Dual ports allow for the use of ring, star, and linear topologies. The 20G2ANC140JN0NNNNN drive has a Size 6 frame and it uses forced air cooling. The minimum airflow requirement for regulating the drive temperature is 504 CFM. No HMI is installed on the drive. However, a keypad and LCD screen on the front panel allow the users to monitor the drive’s operating parameters.



Repair Services for 20G2ANC140JN0NNNNN

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 20G2ANC140JN0NNNNN. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 20G2ANC140JN0NNNNN

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 20G2ANC140JN0NNNNN

Resolutions For 20G2ANC140JN0NNNNN

About

Technical Specifications for 20G2ANC140JN0NNNNN

BrandAllen-Bradley / Rockwell Automation
SeriesPowerFlex 755TS
Part Number20G2ANC140JN0NNNNN
Product TypeMotor Control Drive
MountingVertical
Input Voltage400 Volts AC, 540 Volts DC
Current Output140 Amps
Power Output75 kilowatts
CoolingForced Air
Enclosure TypeOpen
Operating Temperature-4 to 122 degrees Fahrenheit
CommunicationDual Ethernet
Frame Size6
BrandAllen-Bradley / Rockwell Automation
SeriesPowerFlex 755TS
Part Number20G2ANC140JN0NNNNN
Product TypeMotor Control Drive
MountingVertical
Input Voltage400 Volts AC, 540 Volts DC
Current Output140 Amps
Power Output75 kilowatts
CoolingForced Air
Enclosure TypeOpen
Operating Temperature-4 to 122 degrees Fahrenheit
CommunicationDual Ethernet
Frame Size6

About 20G2ANC140JN0NNNNN

The 20G2ANC140JN0NNNNN drive is a motor control drive from the Allen-Bradley PowerFlex 755TS product line. The drive supports multiple motor control algorithms. One of these is patented Allen-Bradley TotalForce technology that supports the precise control of the motor speed, position, and torque. TotalForce technology incorporates several patented features that optimize industrial control systems for high productivity. The input voltage rating of the 20G2ANC140JN0NNNNN drive is 400 Volts AC (3-phase) or 540 Volts DC. The drive supports AC input with precharge but it does not include DC terminals. The output current rating of the drive is 140 Amps. The output power ratings of the 20G2ANC140JN0NNNNN drive are 75 kilowatts in the normal duty mode and 55 kilowatts in the heavy-duty mode. The drive output derates with single-phase AC input voltage. With single-phase AC input voltage, the current output falls to 72 Amps and the power output falls to 37 kilowatts.



The Allen-Bradley 20G2ANC140JN0NNNNN PowerFlex 755TS series motor control drive comes in an open enclosure. The protection rating of the drive’s front panel is IP 20 and the protection rating of the rear portion of the drive is IP 00. The drive operates optimally at temperatures between -4 and 122 degrees Fahrenheit. Drive operation with derated output is also possible at temperatures of up to 140 degrees Fahrenheit. An unused 20G2ANC140JN0NNNNN drive should be stored in an environment with an ambient temperature range of -40 to 158 degrees Fahrenheit. The drive includes dual Gigabit Ethernet ports for high-speed network communication. Dual ports allow for the use of ring, star, and linear topologies. The 20G2ANC140JN0NNNNN drive has a Size 6 frame and it uses forced air cooling. The minimum airflow requirement for regulating the drive temperature is 504 CFM. No HMI is installed on the drive. However, a keypad and LCD screen on the front panel allow the users to monitor the drive’s operating parameters.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 20G2ANC140JN0NNNNN. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 20G2ANC140JN0NNNNN. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF