20G2ANC170JN0NNNNN | Allen Bradley Drives PowerFlex 755TS

20G2ANC170JN0NNNNN

20G2ANC170JN0NNNNN

Description:

The Allen-Bradley 20G2ANC170JN0NNNNN motor control drive is a 140 Amps-rated drive from the PowerFlex 755TS series. Its input rating is 400 Volts AC or 540 Volts DC. The 20G2ANC170JN0NNNNN drive’s enclosure is open.

Rated 4.5 with 11 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Call

Submit RFQ for 20G2ANC170JN0NNNNN

Add more parts to quote

Description:

The Allen-Bradley 20G2ANC170JN0NNNNN motor control drive is a 140 Amps-rated drive from the PowerFlex 755TS series. Its input rating is 400 Volts AC or 540 Volts DC. The 20G2ANC170JN0NNNNN drive’s enclosure is open.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 20G2ANC170JN0NNNNN.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.5 with 11 reviews

    Technical Specifications for 20G2ANC170JN0NNNNN

BrandAllen-Bradley / Rockwell Automation
SeriesPowerFlex 755TS
Part Number20G2ANC170JN0NNNNN
Product TypeMotor Control Drive
EnclosureOpen
Current Output170 Amps
CoolingForced Air
Required Airflow504 CFM
HeatsinkYes
HMINone
Weight105 pounds
MountingVertical
Power Output90 kilowatts
BrandAllen-Bradley / Rockwell Automation
SeriesPowerFlex 755TS
Part Number20G2ANC170JN0NNNNN
Product TypeMotor Control Drive
EnclosureOpen
Current Output170 Amps
CoolingForced Air
Required Airflow504 CFM
HeatsinkYes
HMINone
Weight105 pounds
MountingVertical
Power Output90 kilowatts
s

About 20G2ANC170JN0NNNNN

The Allen-Bradley 20G2ANC170JN0NNNNN drive is an industrial motor control drive. It is designed for high-performance industrial motor control applications. The drive is part of the Allen-Bradley PowerFlex 755TS product line. The 20G2ANC170JN0NNNNN drive enclosure is open and it provides the drive with standard protection against corrosive elements in its environment. The drive cools via forced-air cooling. This cooling method relies on a steady level of airflow produced by a cooling fan or blower. The drive also includes a heatsink for increased heat dissipation. The minimum recommended airflow for the 20G2ANC170JN0NNNNN drive is 504 CFM. If the airflow is less than the recommended value, the ambient temperature will increase beyond the acceptable limits, which can lead to equipment malfunctioning or equipment failure. The maximum ambient temperature at which the 20G2ANC170JN0NNNNN motor control drive can support its maximum rated output power is 50 degrees Celsius.



The maximum permitted ambient temperature for the Allen-Bradley 20G2ANC170JN0NNNNN PowerFlex 755TS series motor control drive with derated output is 60 degrees Celsius. Allen-Bradley recommends a minimum of 76.2 millimeters of vertical spacing between adjacent drives in a system. The 20G2ANC170JN0NNNNN drive must be mounted in a vertical orientation. It dissipates 1691 Watts of heat during normal operation. The drive’s approximate weight is 105 pounds. Additionally, the drive’s height is 665.5 millimeters, its width is 308 millimeters, and its depth is 346.6 millimeters. The input voltage rating of the 20G2ANC170JN0NNNNN drive is 540 Volts DC or 400 Volts AC. It supports single-phase and 3-phase AC input, but only 3-phase input supports the full rated output. The normal-duty drive output power rating is 90 kilowatts. The heavy-duty drive output power rating is 90 kilowatts. The continuous current output rating of the 20G2ANC170JN0NNNNN drive is 170 Amps. The drive’s derated output ratings with single-phase input voltage include 45 kilowatts of output power, 85 Amps of output current, and 157 Amps of input current. Only trained technicians should handle, install, or repair the drive and its associated equipment.



Repair Services for 20G2ANC170JN0NNNNN

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 20G2ANC170JN0NNNNN. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 20G2ANC170JN0NNNNN

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 20G2ANC170JN0NNNNN

Resolutions For 20G2ANC170JN0NNNNN

About

Technical Specifications for 20G2ANC170JN0NNNNN

BrandAllen-Bradley / Rockwell Automation
SeriesPowerFlex 755TS
Part Number20G2ANC170JN0NNNNN
Product TypeMotor Control Drive
EnclosureOpen
Current Output170 Amps
CoolingForced Air
Required Airflow504 CFM
HeatsinkYes
HMINone
Weight105 pounds
MountingVertical
Power Output90 kilowatts
BrandAllen-Bradley / Rockwell Automation
SeriesPowerFlex 755TS
Part Number20G2ANC170JN0NNNNN
Product TypeMotor Control Drive
EnclosureOpen
Current Output170 Amps
CoolingForced Air
Required Airflow504 CFM
HeatsinkYes
HMINone
Weight105 pounds
MountingVertical
Power Output90 kilowatts

About 20G2ANC170JN0NNNNN

The Allen-Bradley 20G2ANC170JN0NNNNN drive is an industrial motor control drive. It is designed for high-performance industrial motor control applications. The drive is part of the Allen-Bradley PowerFlex 755TS product line. The 20G2ANC170JN0NNNNN drive enclosure is open and it provides the drive with standard protection against corrosive elements in its environment. The drive cools via forced-air cooling. This cooling method relies on a steady level of airflow produced by a cooling fan or blower. The drive also includes a heatsink for increased heat dissipation. The minimum recommended airflow for the 20G2ANC170JN0NNNNN drive is 504 CFM. If the airflow is less than the recommended value, the ambient temperature will increase beyond the acceptable limits, which can lead to equipment malfunctioning or equipment failure. The maximum ambient temperature at which the 20G2ANC170JN0NNNNN motor control drive can support its maximum rated output power is 50 degrees Celsius.



The maximum permitted ambient temperature for the Allen-Bradley 20G2ANC170JN0NNNNN PowerFlex 755TS series motor control drive with derated output is 60 degrees Celsius. Allen-Bradley recommends a minimum of 76.2 millimeters of vertical spacing between adjacent drives in a system. The 20G2ANC170JN0NNNNN drive must be mounted in a vertical orientation. It dissipates 1691 Watts of heat during normal operation. The drive’s approximate weight is 105 pounds. Additionally, the drive’s height is 665.5 millimeters, its width is 308 millimeters, and its depth is 346.6 millimeters. The input voltage rating of the 20G2ANC170JN0NNNNN drive is 540 Volts DC or 400 Volts AC. It supports single-phase and 3-phase AC input, but only 3-phase input supports the full rated output. The normal-duty drive output power rating is 90 kilowatts. The heavy-duty drive output power rating is 90 kilowatts. The continuous current output rating of the 20G2ANC170JN0NNNNN drive is 170 Amps. The drive’s derated output ratings with single-phase input voltage include 45 kilowatts of output power, 85 Amps of output current, and 157 Amps of input current. Only trained technicians should handle, install, or repair the drive and its associated equipment.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 20G2ANC170JN0NNNNN. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 20G2ANC170JN0NNNNN. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF