20G2ANC205JN0NNNNN

The Allen-Bradley 20G2ANC205JN0NNNNN drive is a high-performance PowerFlex 755TS series motor control drive. It supports 400 Volts AC or 540 Volts DC of input voltage. Additionally, the drive supports both 3-phase and 1-phase AC input voltage. However, the rated output of the drive is only valid for 3-phase AC input. The rated current output of the 20G2ANC205JN0NNNNN drive is 205 Amps. The rated normal duty output power is 110 kilowatts. The rated heavy-duty output power of the drive is 90 kilowatts. The derated output specifications for the drive with single-phase input are 104 Amps of current and 55 kilowatts of output power. The 20G2ANC205JN0NNNNN motor control drive is available in an open enclosure. The protection rating of the drive’s front panel is IP 20 and the protection rating for the rest of the drive is IP 00.

The Allen-Bradley 20G2ANC205JN0NNNNN PowerFlex 755TS series motor control drive has a CM jumper installed, but there is no DB transistor on the drive. The 20G2ANC205JN0NNNNN drive also does not include an HMI. However, a digital display and keypad on the front panel support the monitoring of drive parameters and basic drive configuration. DC terminals are not available on the drive. The enclosure of the drive provides standard protection against corrosive gasses and vapors. The cooling method employed by the 20G2ANC205JN0NNNNN drive is forced air cooling. With a Size 6 frame, the minimum airflow requirement for proper heat dissipation is 504 CFM. Integrated dual Ethernet ports with Gigabit speeds allow for rapid communication in multiple topologies, including linear, ring, and star topologies. The drive’s featured motor control methods include sine-coded PWM and TotalForce control technology. The predictive maintenance feature on the drive allows for proactive component replacement that minimizes system downtime. The 20G2ANC205JN0NNNNN drive’s ambient temperature rating for operation without derating is -20 to 50 degrees Celsius.