20G2ANC260JN0NNNNN | Allen Bradley Drives PowerFlex 755TS

20G2ANC260JN0NNNNN

20G2ANC260JN0NNNNN

Description:

The Allen-Bradley 20G2ANC260JN0NNNNN PowerFlex 755TS series drive is a motor control drive with TotalFORCE control technology. It is designed to handle a wide range of industrial motor control applications. The 20G2ANC260JN0NNNNN drive is designed for vertical mounting.

Rated 4.5 with 14 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Call

Submit RFQ for 20G2ANC260JN0NNNNN

Add more parts to quote

Description:

The Allen-Bradley 20G2ANC260JN0NNNNN PowerFlex 755TS series drive is a motor control drive with TotalFORCE control technology. It is designed to handle a wide range of industrial motor control applications. The 20G2ANC260JN0NNNNN drive is designed for vertical mounting.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 20G2ANC260JN0NNNNN.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.5 with 14 reviews

    Technical Specifications for 20G2ANC260JN0NNNNN

BrandAllen-Bradley / Rockwell Automation
SeriesPowerFlex 755TS
Part Number20G2ANC260JN0NNNNN
Product TypeMotor Control Drive
MountingVertical
EnclosureOpen
Input Voltage400 Volts AC, 540 Volts DC
Current Output260 Amps
Power Output132 kilowatts
HeatsinkYes
HMINone
DC TerminalsNone
CoolingForced Air
BrandAllen-Bradley / Rockwell Automation
SeriesPowerFlex 755TS
Part Number20G2ANC260JN0NNNNN
Product TypeMotor Control Drive
MountingVertical
EnclosureOpen
Input Voltage400 Volts AC, 540 Volts DC
Current Output260 Amps
Power Output132 kilowatts
HeatsinkYes
HMINone
DC TerminalsNone
CoolingForced Air
s

About 20G2ANC260JN0NNNNN

The Allen-Bradley 20G2ANC260JN0NNNNN drive is a PowerFlex 755TS series motor control drive. It offers precise and adaptive motor control for a variety of motors in industrial applications. The 20G2ANC260JN0NNNNN drive features integrated Gigabit Ethernet ports for communication. The approximate weight of the drive is 48 kilograms. Its dimensions are 26.2 x 12.1 x 8.1 inches. A total installation depth of 13.6 inches is required if the operators plan or need to open the rear drive door completely. For stability, Allen-Bradley recommends always installing mounting hardware in all 4 corners of the drive’s mounting legs. The 20G2ANC260JN0NNNNN drive cools via forced air cooling. To ensure smooth airflow for air cooling, Allen-Bradley recommends 3 inches of vertical spacing between adjacent drives in the same system. The airflow rating required for drive cooling is 504 CFM. The working temperature range of the 20G2ANC260JN0NNNNN drive is -20 to 50 degrees Celsius.



The Allen-Bradley 20G2ANC260JN0NNNNN PowerFlex 755TS series motor control drive supports AC input with precharge but it does not include DC terminals. The enclosure of the 20G2ANC260JN0NNNNN drive is open with an IP 20 rating for the front panel and an IP 00 rating for the remaining drive parts. The drive’s input voltage ratings are 400 Volts AC or 540 Volts DC. It can support 3-phase or 1-phase AC voltage. Three-phase AC input delivers the full rated drive output. Single-phase AC input can only support derated output. The drive’s normal output current rating is 260 Amps. The normal duty output power rating of the 20G2ANC260JN0NNNNN drive is 132 kilowatts and the heavy-duty output power rating of the 20G2ANC260JN0NNNNN drive is 110 kilowatts with 3-phase AC voltage. The 20G2ANC260JN0NNNNN drive does not include a factory-fitted HMI unit. However, optional field-installable HMI modules are available. Only trained personnel should install the drive and any associated industrial equipment. This will help to minimize installation errors, and ensure reliable drive performance. The drive is certified by the CE and UL standards.



Repair Services for 20G2ANC260JN0NNNNN

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 20G2ANC260JN0NNNNN. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 20G2ANC260JN0NNNNN

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 20G2ANC260JN0NNNNN

Resolutions For 20G2ANC260JN0NNNNN

About

Technical Specifications for 20G2ANC260JN0NNNNN

BrandAllen-Bradley / Rockwell Automation
SeriesPowerFlex 755TS
Part Number20G2ANC260JN0NNNNN
Product TypeMotor Control Drive
MountingVertical
EnclosureOpen
Input Voltage400 Volts AC, 540 Volts DC
Current Output260 Amps
Power Output132 kilowatts
HeatsinkYes
HMINone
DC TerminalsNone
CoolingForced Air
BrandAllen-Bradley / Rockwell Automation
SeriesPowerFlex 755TS
Part Number20G2ANC260JN0NNNNN
Product TypeMotor Control Drive
MountingVertical
EnclosureOpen
Input Voltage400 Volts AC, 540 Volts DC
Current Output260 Amps
Power Output132 kilowatts
HeatsinkYes
HMINone
DC TerminalsNone
CoolingForced Air

About 20G2ANC260JN0NNNNN

The Allen-Bradley 20G2ANC260JN0NNNNN drive is a PowerFlex 755TS series motor control drive. It offers precise and adaptive motor control for a variety of motors in industrial applications. The 20G2ANC260JN0NNNNN drive features integrated Gigabit Ethernet ports for communication. The approximate weight of the drive is 48 kilograms. Its dimensions are 26.2 x 12.1 x 8.1 inches. A total installation depth of 13.6 inches is required if the operators plan or need to open the rear drive door completely. For stability, Allen-Bradley recommends always installing mounting hardware in all 4 corners of the drive’s mounting legs. The 20G2ANC260JN0NNNNN drive cools via forced air cooling. To ensure smooth airflow for air cooling, Allen-Bradley recommends 3 inches of vertical spacing between adjacent drives in the same system. The airflow rating required for drive cooling is 504 CFM. The working temperature range of the 20G2ANC260JN0NNNNN drive is -20 to 50 degrees Celsius.



The Allen-Bradley 20G2ANC260JN0NNNNN PowerFlex 755TS series motor control drive supports AC input with precharge but it does not include DC terminals. The enclosure of the 20G2ANC260JN0NNNNN drive is open with an IP 20 rating for the front panel and an IP 00 rating for the remaining drive parts. The drive’s input voltage ratings are 400 Volts AC or 540 Volts DC. It can support 3-phase or 1-phase AC voltage. Three-phase AC input delivers the full rated drive output. Single-phase AC input can only support derated output. The drive’s normal output current rating is 260 Amps. The normal duty output power rating of the 20G2ANC260JN0NNNNN drive is 132 kilowatts and the heavy-duty output power rating of the 20G2ANC260JN0NNNNN drive is 110 kilowatts with 3-phase AC voltage. The 20G2ANC260JN0NNNNN drive does not include a factory-fitted HMI unit. However, optional field-installable HMI modules are available. Only trained personnel should install the drive and any associated industrial equipment. This will help to minimize installation errors, and ensure reliable drive performance. The drive is certified by the CE and UL standards.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 20G2ANC260JN0NNNNN. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 20G2ANC260JN0NNNNN. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF