Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley PowerFlex 755TS 20GE1GD066JA0NNNNN

Product image is representative; revision or series may vary. Contact us to request a specific version.

20GE1GD066JA0NNNNN

|

The Allen-Bradley 20GE1GD066JA0NNNNN drive is a PowerFlex 755TS series motor control drive. Its housing is IP 54 rated. The continuous current output rating of the 20GE1GD066JA0NNNNN drive is 66 Amps.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 20GE1GD066JA0NNNNN

ManufacturerAllen Bradley
Product typeMotor Control Drive
Product LinePowerFlex 755TS
Part Number20GE1GD066JA0NNNNN
Weight50.00 lbs (22.68 kg)
Mounting OrientationVertical
EnclosureNEMA Type 12
Protection RatingIP 54
Current Output66 Amps
AC Input Voltage480 Volts AC,
HeatsinkYes
HMINone
DC TerminalsYes
DC Input Voltage650 Volts DC

The 20GE1GD066JA0NNNNN motor control drive has been designed and manufactured by Allen-Bradley as part of the PowerFlex 755TS series. The drive comes with DC terminals and the users can use it with AC or DC input voltage. The DC input voltage rating is 650 Volts DC. The AC input voltage rating is 480 Volts AC. The users can connect the drive to either 3-phase or single-phase AC input voltage. However, the full rated output of the drive is only available when the 20GE1GD066JA0NNNNN drive is used with 3-phase AC input voltage. The output ratings of the 20GE1GD066JA0NNNNN drive include 66 Amps of continuous current, 50 Horsepower of normal duty output power, and 30 Horsepower of heavy-duty output power. The frame size of the drive is Size 4. The approximate shipping weight of the 20GE1GD066JA0NNNNN drive is 31 pounds.

The users can mount the Allen-Bradley 20GE1GD066JA0NNNNN PowerFlex 755TS series motor control drive vertically on a flat surface. There are 4 mounting holes available on the drive enclosure. Each hole has a 0.56-inch diameter. These holes allow for easy and secure drive mounting. The height of the drive is 22.5 inches, the width of the drive is 11.8 inches, and the depth of the drive is 8.7 inches. The drive comes with a heatsink and it cools down via surface cooling (forced air cooling). The total amount of heat dissipated by the 20GE1GD066JA0NNNNN drive is 551 Watts. The IP 54 rated drive enclosure supports corrosive gas protection and it is suited to use in adverse environmental conditions. The 20GE1GD066JA0NNNNN drive does not feature an HMI. The users can order an optional HMI module separately and install it in the field. The minimum vertical mounting clearance required for smooth airflow around the drive is 3 inches.