Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley PowerFlex 755TS 20GE1NC037JA0NNNNN

Product image is representative; revision or series may vary. Contact us to request a specific version.

20GE1NC037JA0NNNNN

|
Need a Specific Revision?

The Allen-Bradley 20GE1NC037JA0NNNNN drive is a PowerFlex 755TS series motor control drive. Its AC input voltage rating is 400 Volts AC. The 20GE1NC037JA0NNNNN drive also includes DC terminals and its DC input voltage rating is 540 Volts DC.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 20GE1NC037JA0NNNNN

ManufacturerAllen Bradley
Product TypeMotor Control Drive
Product LinePowerFlex 755TS
Part Number20GE1NC037JA0NNNNN
Weight50.00 lbs (22.68 kg)
Input Voltage400 Volts AC, 540 Volts DC
Current Output37 Amps
Mounting OrientationVertical
CoolingForced Air
HMINone
HeatsinkYes
Operating Temperature-20 to 50 degrees Celsius.
Request a Repair

The 20GE1NC037JA0NNNNN motor control drive is an advanced digital motor control drive from the Allen-Bradley PowerFlex 755TS series. Even though the drive is primarily designed for AC input voltage, it also accepts DC input voltage. The drive includes DC terminals and the DC input voltage rating is 540 Volts DC. The AC input voltage rating is 400 Volts AC. Even though use of 3-phase AC input voltage is recommended, the drive also supports single-phase AC input. However, the full rated output power can only be achieved with 3-phase AC input. The continuous current output rating of the 20GE1NC037JA0NNNNN drive is 37 Amps. The normal duty output power rating of the 20GE1NC037JA0NNNNN motor control drive is 18.5 kilowatts. The heavy-duty output power rating of the 20GE1NC037JA0NNNNN motor control drive is 15 kilowatts.

The enclosure of the Allen-Bradley 20GE1NC037JA0NNNNN PowerFlex 755TS series motor control drive is open and the drive cools by means of surface cooling or forced-air cooling. The minimum required airflow for the drive is 80 cubic feet per minute. The airflow should equal or exceed this manufacturer-recommended rating. If the airflow falls below this level, then the ambient temperature and the internal drive temperature will rise above safe thresholds. If this happens, the drive performance can degrade or the drive components can fail. The working temperature without derating for the drive is -20 to 50 degrees Celsius. The maximum permitted working temperature with derating is 60 degrees Celsius. The housing of the 20GE1NC037JA0NNNNN provides an improved level of corrosive gas protection. Only trained and qualified personnel should be involved in the drive installation, operation and maintenance processes. This will help to minimize installation errors that can affect drive performance negatively. The drive’s weight is 26 pounds. The drive dimensions are 17.87 x 7.48 x 8.35 inches.