Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley PowerFlex 755TS 20GE4NC140JN0NNNNN

Product image is representative; revision or series may vary. Contact us to request a specific version.

20GE4NC140JN0NNNNN

|
Need a Specific Revision?

The Allen-Bradley 20GE4NC140JN0NNNNN PowerFlex 755TS series motor control drive is an AC and DC-powered drive. It is designed for vertical mounting. The 20GE4NC140JN0NNNNN drive enclosure is open.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 20GE4NC140JN0NNNNN

ManufacturerAllen Bradley
Product TypeMotor Control Drive
Product LinePowerFlex 755TS
Part Number20GE4NC140JN0NNNNN
Weight200.00 lbs (90.72 kg)
Mounting OrientationVertical
CoolingForced Air
Current Output140 Amps
Input Voltage400 Volts AC, 540 Volts DC
HMINone
Enclosure TypeOpen
Frame Size6
Temperature-20 to 50 degrees Celsius
CommunicationDual Ethernet Ports
Request a Repair

The Allen-Bradley 20GE4NC140JN0NNNNN PowerFlex 755TS series drive is a digital motor control drive. Its housing provides an advanced degree of corrosive gas protection. The drive housing is open with an IP 00 protection rating for the rear and an IP 20 protection rating for the front side. Allen-Bradley has designed the 20GE4NC140JN0NNNNN drive for vertical mounting against a flat surface. Holes in the housing provide a convenient means of secure mounting for the drive. The 20GE4NC140JN0NNNNN drive dimensions are 665 x 308 x 204.4 millimeters. Note that a total depth of 346 millimeters is required if the operators need to open the rear door completely. The diameter of the mounting holes is 14.5 millimeters. The cooling method for the drive is forced air cooling with a minimum airflow requirement of 504 CFM airflow. The rated sound level of the 20GE4NC140JN0NNNNN motor control drive, measured at 2 meters, is 73 dB.

The Allen-Bradley 20GE4NC140JN0NNNNN PowerFlex 755TS series motor control drive is supplied without an HMI module. However, Allen-Bradley manufactures 2 optional HMI modules that are compatible with PowerFlex 755TS drives that can be ordered separately from the drives and installed in the field. The 20GE4NC140JN0NNNNN drive has a CM jumper. The input voltage rating of the 20GE4NC140JN0NNNNN drive is 400 Volts AC or 540 Volts DC. The rated current output is 140 Amps. The rated normal duty output power of the 20GE4NC140JN0NNNNN drive is 75 kilowatts. The rated heavy-duty output power of the 20GE4NC140JN0NNNNN drive is 55 kilowatts. The drive has a modular slot-based architecture. The communication options that the drive supports include a coaxial ControlNet module, DeviceNet module, Profibus DPV1 module, ControlNet T-tap straight module, and a fast synchronized data transfer module. The available feedback options include an incremental encoder, dual incremental encoder, and a universal feedback board option. The available safety options include the safe torque off and safe speed monitor option.