20GE4NC205JN0NNNNN | Allen Bradley Drives PowerFlex 755TS

20GE4NC205JN0NNNNN

20GE4NC205JN0NNNNN

Description:

The Allen-Bradley 20GE4NC205JN0NNNNN drive is a PowerFlex 755TS series motor control drive. It is available in an open enclosure. The 20GE4NC205JN0NNNNN drive delivers 205 Amps of continuous output current.

Rated 4.8 with 8 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Call

Submit RFQ for 20GE4NC205JN0NNNNN

Add more parts to quote

Description:

The Allen-Bradley 20GE4NC205JN0NNNNN drive is a PowerFlex 755TS series motor control drive. It is available in an open enclosure. The 20GE4NC205JN0NNNNN drive delivers 205 Amps of continuous output current.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 20GE4NC205JN0NNNNN.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.8 with 8 reviews

    Technical Specifications for 20GE4NC205JN0NNNNN

BrandAllen-Bradley / Rockwell Automation
SeriesPowerFlex 755TS
Part Number20GE4NC205JN0NNNNN
Product TypeMotor Control Drive
EnclosureOpen
Current Output205 Amps
Input Voltage400 Volts AC, 540 Volts DC
CoolingForced Air
CommunicationDual Ethernet
HMINone
HeatsinkYes
Mounting OrientationVertical
Frame Size6
BrandAllen-Bradley / Rockwell Automation
SeriesPowerFlex 755TS
Part Number20GE4NC205JN0NNNNN
Product TypeMotor Control Drive
EnclosureOpen
Current Output205 Amps
Input Voltage400 Volts AC, 540 Volts DC
CoolingForced Air
CommunicationDual Ethernet
HMINone
HeatsinkYes
Mounting OrientationVertical
Frame Size6
s

About 20GE4NC205JN0NNNNN

The Allen-Bradley 20GE4NC205JN0NNNNN  PowerFlex 755TS series motor control drive is an industrial AC and DC-powered motor control drive. It is available in an open enclosure and designed for forced air cooling. The drive requires at least 504 CFM of steady airflow. If the airflow falls below this specified value, the ambient temperature will rise above the permitted threshold. The operating temperature range recommended by Allen-Bradley for the drive is -20 to 50 degrees Celsius. Allen-Bradley also recommends a minimum of 76.2 millimeters of vertical spacing on the top and bottom sides of the mounted drive. The drive housing provides enhanced corrosive gas protection. The 20GE4NC205JN0NNNNN drive is a drive that supports DC input with precharge. The input voltage rating of the 20GE4NC205JN0NNNNN drive is 400 Volts AC or 540 Volts DC. The drive works with either three-phase or single-phase AC input voltage. The rated current output of the drive is 205 Amps. 



The Allen-Bradley 20GE4NC205JN0NNNNN PowerFlex 755TS series motor control drive can operate in normal duty and heavy-duty modes and its output power ratings are 110 kilowatts (normal duty) and 90 kilowatts (heavy-duty). The 20GE4NC205JN0NNNNN drive is supplied with a blank plate instead of an HMI module. Two optional HMI modules are compatible with the drive and the operators can order either of these HMI modules and install them on the drive if necessary. In addition to HMI modules, several other types of optional modules are also available for customizing the drive, including communication modules, feedback modules, I/O modules, and safety modules. Improper handling of the drive can lead to equipment damage and installation errors. Therefore, only trained personnel should install and operate the 20GE4NC205JN0NNNNN drive, any optional modules that it has, and other related equipment. The drive dimensions are 665 x 308 x 346 millimeters and the drive’s approximate weight is 48 kilograms.



Repair Services for 20GE4NC205JN0NNNNN

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 20GE4NC205JN0NNNNN. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 20GE4NC205JN0NNNNN

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 20GE4NC205JN0NNNNN

Resolutions For 20GE4NC205JN0NNNNN

About

Technical Specifications for 20GE4NC205JN0NNNNN

BrandAllen-Bradley / Rockwell Automation
SeriesPowerFlex 755TS
Part Number20GE4NC205JN0NNNNN
Product TypeMotor Control Drive
EnclosureOpen
Current Output205 Amps
Input Voltage400 Volts AC, 540 Volts DC
CoolingForced Air
CommunicationDual Ethernet
HMINone
HeatsinkYes
Mounting OrientationVertical
Frame Size6
BrandAllen-Bradley / Rockwell Automation
SeriesPowerFlex 755TS
Part Number20GE4NC205JN0NNNNN
Product TypeMotor Control Drive
EnclosureOpen
Current Output205 Amps
Input Voltage400 Volts AC, 540 Volts DC
CoolingForced Air
CommunicationDual Ethernet
HMINone
HeatsinkYes
Mounting OrientationVertical
Frame Size6

About 20GE4NC205JN0NNNNN

The Allen-Bradley 20GE4NC205JN0NNNNN  PowerFlex 755TS series motor control drive is an industrial AC and DC-powered motor control drive. It is available in an open enclosure and designed for forced air cooling. The drive requires at least 504 CFM of steady airflow. If the airflow falls below this specified value, the ambient temperature will rise above the permitted threshold. The operating temperature range recommended by Allen-Bradley for the drive is -20 to 50 degrees Celsius. Allen-Bradley also recommends a minimum of 76.2 millimeters of vertical spacing on the top and bottom sides of the mounted drive. The drive housing provides enhanced corrosive gas protection. The 20GE4NC205JN0NNNNN drive is a drive that supports DC input with precharge. The input voltage rating of the 20GE4NC205JN0NNNNN drive is 400 Volts AC or 540 Volts DC. The drive works with either three-phase or single-phase AC input voltage. The rated current output of the drive is 205 Amps. 



The Allen-Bradley 20GE4NC205JN0NNNNN PowerFlex 755TS series motor control drive can operate in normal duty and heavy-duty modes and its output power ratings are 110 kilowatts (normal duty) and 90 kilowatts (heavy-duty). The 20GE4NC205JN0NNNNN drive is supplied with a blank plate instead of an HMI module. Two optional HMI modules are compatible with the drive and the operators can order either of these HMI modules and install them on the drive if necessary. In addition to HMI modules, several other types of optional modules are also available for customizing the drive, including communication modules, feedback modules, I/O modules, and safety modules. Improper handling of the drive can lead to equipment damage and installation errors. Therefore, only trained personnel should install and operate the 20GE4NC205JN0NNNNN drive, any optional modules that it has, and other related equipment. The drive dimensions are 665 x 308 x 346 millimeters and the drive’s approximate weight is 48 kilograms.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 20GE4NC205JN0NNNNN. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 20GE4NC205JN0NNNNN. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF