20GE4NC260JN0NNNNN | Allen Bradley Drives PowerFlex 755TS

20GE4NC260JN0NNNNN

20GE4NC260JN0NNNNN

Description:

The Allen-Bradley 20GE4NC260JN0NNNNN drive is a PowerFlex 755TS series motor control drive. It is available in an open enclosure. The continuous output current rating of the 20GE4NC260JN0NNNNN drive is 260 Amps.

Rated 4.5 with 19 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Call

Submit RFQ for 20GE4NC260JN0NNNNN

Add more parts to quote

Description:

The Allen-Bradley 20GE4NC260JN0NNNNN drive is a PowerFlex 755TS series motor control drive. It is available in an open enclosure. The continuous output current rating of the 20GE4NC260JN0NNNNN drive is 260 Amps.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 20GE4NC260JN0NNNNN.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.5 with 19 reviews

    Technical Specifications for 20GE4NC260JN0NNNNN

BrandAllen-Bradley / Rockwell Automation
SeriesPowerFlex 755TS
Part Number20GE4NC260JN0NNNNN
Product typeMotor Control Drive
EnclosureOpen
Current Output260 Amps
Input Voltage400 Volts AC
Mounting OrientationVertical
CoolingForced Air
HMINone
CommunicationDual Ethernet Ports
Working Temperature-20 to 50 degrees Celsius
Minimum Airflow504 CFM
BrandAllen-Bradley / Rockwell Automation
SeriesPowerFlex 755TS
Part Number20GE4NC260JN0NNNNN
Product typeMotor Control Drive
EnclosureOpen
Current Output260 Amps
Input Voltage400 Volts AC
Mounting OrientationVertical
CoolingForced Air
HMINone
CommunicationDual Ethernet Ports
Working Temperature-20 to 50 degrees Celsius
Minimum Airflow504 CFM
s

About 20GE4NC260JN0NNNNN

The Allen-Bradley 20GE4NC260JN0NNNNN PowerFlex 755TS series drive is an industrial motor control drive. It is available in an open enclosure that is designed for vertical mounting. The protection rating of the drive’s front panel is IP 20. The protection rating of the other parts of the drive, excluding the front panel, is IP 00. The input voltage rating of the 20GE4NC260JN0NNNNN drive is 400 Volts AC or 540 Volts DC. The operators can connect the drive to either 3-phase or single-phase AC power supplies. For 3-phase AC input, the output current rating is 260 Amps and the output power rating is 132 kilowatts. For single-phase AC input, the output current rating is 104 Amps and the output power rating is 55 kilowatts. The 20GE4NC260JN0NNNNN drive dissipates 2961 Watts of heat during operation. A heatsink and cooling fans are provided on the drive to prevent overheating.



Forced air cooling for the Allen-Bradley 20GE4NC260JN0NNNNN PowerFlex 755TS series motor control drive requires at least 504 CFM or 856.3 m3/s of airflow. The recommended ambient temperature for safe drive operation ranges from -20 to 50 degrees Celsius. An unused drive needs to be kept in an environment where the ambient temperature is between -40 and 70 degrees Celsius. The ambient relative humidity level should always be between 5 and 95% for operation and storage. The 20GE4NC260JN0NNNNN drive is designed with an advanced “XT” corrosive gas protection feature. The drive has a modular design with slots for optional hardware modules. The operators can install HMI modules, safety modules, communication modules, and I/O modules in these slots to meet their system application requirements. Only trained, qualified, and experienced personnel should carry out all of the installation, operation, maintenance, and service related activities on the 20GE4NC260JN0NNNNN drive.



Repair Services for 20GE4NC260JN0NNNNN

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 20GE4NC260JN0NNNNN. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 20GE4NC260JN0NNNNN

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 20GE4NC260JN0NNNNN

Resolutions For 20GE4NC260JN0NNNNN

About

Technical Specifications for 20GE4NC260JN0NNNNN

BrandAllen-Bradley / Rockwell Automation
SeriesPowerFlex 755TS
Part Number20GE4NC260JN0NNNNN
Product typeMotor Control Drive
EnclosureOpen
Current Output260 Amps
Input Voltage400 Volts AC
Mounting OrientationVertical
CoolingForced Air
HMINone
CommunicationDual Ethernet Ports
Working Temperature-20 to 50 degrees Celsius
Minimum Airflow504 CFM
BrandAllen-Bradley / Rockwell Automation
SeriesPowerFlex 755TS
Part Number20GE4NC260JN0NNNNN
Product typeMotor Control Drive
EnclosureOpen
Current Output260 Amps
Input Voltage400 Volts AC
Mounting OrientationVertical
CoolingForced Air
HMINone
CommunicationDual Ethernet Ports
Working Temperature-20 to 50 degrees Celsius
Minimum Airflow504 CFM

About 20GE4NC260JN0NNNNN

The Allen-Bradley 20GE4NC260JN0NNNNN PowerFlex 755TS series drive is an industrial motor control drive. It is available in an open enclosure that is designed for vertical mounting. The protection rating of the drive’s front panel is IP 20. The protection rating of the other parts of the drive, excluding the front panel, is IP 00. The input voltage rating of the 20GE4NC260JN0NNNNN drive is 400 Volts AC or 540 Volts DC. The operators can connect the drive to either 3-phase or single-phase AC power supplies. For 3-phase AC input, the output current rating is 260 Amps and the output power rating is 132 kilowatts. For single-phase AC input, the output current rating is 104 Amps and the output power rating is 55 kilowatts. The 20GE4NC260JN0NNNNN drive dissipates 2961 Watts of heat during operation. A heatsink and cooling fans are provided on the drive to prevent overheating.



Forced air cooling for the Allen-Bradley 20GE4NC260JN0NNNNN PowerFlex 755TS series motor control drive requires at least 504 CFM or 856.3 m3/s of airflow. The recommended ambient temperature for safe drive operation ranges from -20 to 50 degrees Celsius. An unused drive needs to be kept in an environment where the ambient temperature is between -40 and 70 degrees Celsius. The ambient relative humidity level should always be between 5 and 95% for operation and storage. The 20GE4NC260JN0NNNNN drive is designed with an advanced “XT” corrosive gas protection feature. The drive has a modular design with slots for optional hardware modules. The operators can install HMI modules, safety modules, communication modules, and I/O modules in these slots to meet their system application requirements. Only trained, qualified, and experienced personnel should carry out all of the installation, operation, maintenance, and service related activities on the 20GE4NC260JN0NNNNN drive.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 20GE4NC260JN0NNNNN. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 20GE4NC260JN0NNNNN. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF