20GEAFD156JA0NNNNN | Allen Bradley Drives PowerFlex 755TS

20GEAFD156JA0NNNNN

20GEAFD156JA0NNNNN

Description:

The Allen-Bradley 20GEAFD156JA0NNNNN PowerFlex 755TS series motor control drive can control induction motors, permanent magnet motors, and synchronous reluctance motors. Its input voltage ratings are 480 Volts AC and 650 Volts DC. Additionally, the 20GEAFD156JA0NNNNN drive’s normal duty output power ratings are 156 Amps and 125 Horsepower.

Rated 4.6 with 6 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Call

Submit RFQ for 20GEAFD156JA0NNNNN

Add more parts to quote

Description:

The Allen-Bradley 20GEAFD156JA0NNNNN PowerFlex 755TS series motor control drive can control induction motors, permanent magnet motors, and synchronous reluctance motors. Its input voltage ratings are 480 Volts AC and 650 Volts DC. Additionally, the 20GEAFD156JA0NNNNN drive’s normal duty output power ratings are 156 Amps and 125 Horsepower.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 20GEAFD156JA0NNNNN.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 6 reviews

    Technical Specifications for 20GEAFD156JA0NNNNN

BrandAllen-Bradley / Rockwell Automation
SeriesPowerFlex 755TS
Part Number20GEAFD156JA0NNNNN
Product TypeMotor Control Drive
Output Power125 Horsepower
Output Current156 Amps
AC Input Voltage480 Volts AC
DC Input Voltage650 Volts DC
Input OptionAC Input With Precharge, No DC Terminals
Operating Temperature-20 to 50 degrees Celsius
BrandAllen-Bradley / Rockwell Automation
SeriesPowerFlex 755TS
Part Number20GEAFD156JA0NNNNN
Product TypeMotor Control Drive
Output Power125 Horsepower
Output Current156 Amps
AC Input Voltage480 Volts AC
DC Input Voltage650 Volts DC
Input OptionAC Input With Precharge, No DC Terminals
Operating Temperature-20 to 50 degrees Celsius
s

About 20GEAFD156JA0NNNNN

The 20GEAFD156JA0NNNNN motor control drive from the Allen-Bradley/Rockwell Automation PowerFlex 755TS series uses adjustable frequency, a variety of control technologies, and a variety of control modes to control a variety of industrial motors. It can be deployed to control permanent magnet motors, whether they are interior permanent magnet (IPM) motors or surface permanent magnet (SPM) motors. The 20GEAFD156JA0NNNNN drive can also control synchronous reluctance types of motors and standard induction motors. This drive also comes with 2 acceleration and deceleration times which can be programmed independently. Both acceleration and deceleration times can be set to anywhere between 0 and 3600 seconds in increments of as little as 0.1 seconds. The 20GEAFD156JA0NNNNN motor control drive can stop its connected motor with one of several available programmable stop modes.



 



The programmable stop modes that the Allen-Bradley/Rockwell Automation 20GEAFD156JA0NNNNN PowerFlex 755TS series drive supports include the ramp stop mode, the coast stop mode, the DC brake stop mode, the ramp-to-hold stop mode, the fast braking stop mode, and the current limit stop mode. Additionally, the 20GEAFD156JA0NNNNN motor control drive’s available selectable motor control modes are the economizer motor control mode, the flux vector motor control mode that features encoder feedback, the flux vector motor control mode that does not feature encoder feedback, the SVC or sensorless vector control mode, and the Volts per Hertz motor control mode. This drive has AC input with precharge, but no DC terminals. The 20GEAFD156JA0NNNNN motor control drive generates 125 Horsepower of maximum normal duty output power. It also operates with a normal duty output current rating of 156 Amps.



Repair Services for 20GEAFD156JA0NNNNN

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 20GEAFD156JA0NNNNN. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 20GEAFD156JA0NNNNN

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 20GEAFD156JA0NNNNN

Resolutions For 20GEAFD156JA0NNNNN

About

Technical Specifications for 20GEAFD156JA0NNNNN

BrandAllen-Bradley / Rockwell Automation
SeriesPowerFlex 755TS
Part Number20GEAFD156JA0NNNNN
Product TypeMotor Control Drive
Output Power125 Horsepower
Output Current156 Amps
AC Input Voltage480 Volts AC
DC Input Voltage650 Volts DC
Input OptionAC Input With Precharge, No DC Terminals
Operating Temperature-20 to 50 degrees Celsius
BrandAllen-Bradley / Rockwell Automation
SeriesPowerFlex 755TS
Part Number20GEAFD156JA0NNNNN
Product TypeMotor Control Drive
Output Power125 Horsepower
Output Current156 Amps
AC Input Voltage480 Volts AC
DC Input Voltage650 Volts DC
Input OptionAC Input With Precharge, No DC Terminals
Operating Temperature-20 to 50 degrees Celsius

About 20GEAFD156JA0NNNNN

The 20GEAFD156JA0NNNNN motor control drive from the Allen-Bradley/Rockwell Automation PowerFlex 755TS series uses adjustable frequency, a variety of control technologies, and a variety of control modes to control a variety of industrial motors. It can be deployed to control permanent magnet motors, whether they are interior permanent magnet (IPM) motors or surface permanent magnet (SPM) motors. The 20GEAFD156JA0NNNNN drive can also control synchronous reluctance types of motors and standard induction motors. This drive also comes with 2 acceleration and deceleration times which can be programmed independently. Both acceleration and deceleration times can be set to anywhere between 0 and 3600 seconds in increments of as little as 0.1 seconds. The 20GEAFD156JA0NNNNN motor control drive can stop its connected motor with one of several available programmable stop modes.



 



The programmable stop modes that the Allen-Bradley/Rockwell Automation 20GEAFD156JA0NNNNN PowerFlex 755TS series drive supports include the ramp stop mode, the coast stop mode, the DC brake stop mode, the ramp-to-hold stop mode, the fast braking stop mode, and the current limit stop mode. Additionally, the 20GEAFD156JA0NNNNN motor control drive’s available selectable motor control modes are the economizer motor control mode, the flux vector motor control mode that features encoder feedback, the flux vector motor control mode that does not feature encoder feedback, the SVC or sensorless vector control mode, and the Volts per Hertz motor control mode. This drive has AC input with precharge, but no DC terminals. The 20GEAFD156JA0NNNNN motor control drive generates 125 Horsepower of maximum normal duty output power. It also operates with a normal duty output current rating of 156 Amps.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 20GEAFD156JA0NNNNN. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 20GEAFD156JA0NNNNN. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF