20GEAGC260JA0NNNNN

The Allen-Bradley 20GEAGC260JA0NNNNN motor control drive is a PowerFlex 755TS series drive. It supports 400 Volts AC 3-phase input voltage or 540 Volts DC input voltage. The drive can also support single-phase AC input, but this leads to output derating. The maximum normal duty rated output of the 20GEAGC260JA0NNNNN drive is 260 Amps of current and 132 kilowatts of power. The drive is a sophisticated piece of control equipment that should only be handled and operated by trained personnel. All personnel working on the drive should understand and implement the drive’s safety instructions. Failure to follow the safety instructions can lead to user injury and equipment damage. The DC bus on the 20GEAGC260JA0NNNNN drive carries high voltages. Once the drive is switched off, personnel working on it should allow sufficient time for the DC bus capacitors to discharge completely before beginning any maintenance procedures to avoid electric shock.

The Allen-Bradley 20GEAGC260JA0NNNNN PowerFlex 755TS series motor control drive comes in an IP 54 rated enclosure and a Size 7 frame. The drive weighs approximately 290 pounds and measures approximately 63.5 x 24 x 18.3 inches. The cooling method used by the drive for heat dissipation during operation is forced-air cooling. At least 756 cubic feet per minute of airflow is required for proper heat dissipation. Allen-Bradley also recommends at least 3 inches of vertical spacing around the drive to ensure smooth airflow around it. The 20GEAGC260JA0NNNNN drive is designed for vertical mounting against a flat surface. The slot-based architecture of the drive supports the installation of various communication, safety, feedback, and I/O modules. The integrated communication option on the 20GEAGC260JA0NNNNN drive consists of dual Gigabit Ethernet ports. Dual ports allow the use of a ring network topology.