Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley PowerFlex 755TS 20GEANC170JA0NNNNN

Product image is representative; revision or series may vary. Contact us to request a specific version.

20GEANC170JA0NNNNN

|
Need a Specific Revision?

The Allen-Bradley 20GEANC170JA0NNNNN drive is a motor control drive from the PowerFlex 755TS series. Its output current rating is 170 Amps. The 20GEANC170JA0NNNNN drive is available in an open enclosure.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 20GEANC170JA0NNNNN

ManufacturerAllen Bradley
Product TypeMotor Control Drive
Product LinePowerFlex 755TS
Part Number20GEANC170JA0NNNNN
Weight200.00 lbs (90.72 kg)
Input Voltage400 Volts AC, 540 Volts DC
Current Output170 Amps
EnclosureNEMA/UL Open
Protection RatingIP 00
HMINone
CoolingForced Air
Mounting OrientationVertical
CommunicationDual Gigabit Ethernet Ports
Minimum Airflow504 CFM
Request a Repair

The Allen-Bradley 20GEANC170JA0NNNNN motor control drive is a PowerFlex 755TS series industrial drive. Under optimal operating conditions, the drive output is rated at 170 Amps of output current and 90 kilowatts of output power. The optimal operating conditions are as follows: 3-phase AC input voltage, an ambient temperature between -20 and 50 degrees Celsius, and 504 CFM of airflow. The airflow requirement is for the 20GEANC170JA0NNNNN drive’s cooling method, which is forced air cooling. Drive operation under suboptimal operating conditions leads to output derating. With single-phase AC input, the output current derates to 85 Amps and the output power derates to 157 kilowatts. The input voltage rating of the 20GEANC170JA0NNNNN motor control drive is 400 Volts AC or 540 Volts DC.

The Allen-Bradley 20GEANC170JA0NNNNN PowerFlex 755TS series motor control drive has an open type of NEMA enclosure with an IP 00 protection rating. The enclosure provides it with a significant level of corrosive gas protection. Because the drive is not protected from dust and moisture, it cannot be used outdoors and it is recommended to mount it inside a cabinet in many indoor environments. To facilitate airflow, Allen-Bradley recommends installing the drive in such a way that it has a minimum of 3 inches of vertical spacing between it and any adjacent drives. According to the drive manual, a minimum of 504 CFM of airflow is required for maintaining the proper ambient temperature within the specified range. The 20GEANC170JA0NNNNN drive supports AC input with precharge. The drive does not support DC terminals. The approximate shipping weight of the drive is 48 kilograms. Only trained personnel should operate and maintain the AC drive.