20GEAND125JA0NNNNN

The 20GEAND125JA0NNNNN motor control drive is part of the Allen-Bradley/Rockwell Automation PowerFlex 755TS series and it is designed for a multitude of motor control applications. The drive can handle motor control applications with advanced system requirements and industrial tasks run by several components that must operate as a cohesive group. The drive is powered by TotalFORCE control technology and it has an AC input option with a pre-charge. The 20GEAND125JA0NNNNN drive does not include terminals for DC voltage. The drive has a cooling system that uses forced air and it comes with an “XT” protection rating for protection from corrosive gas. The drive consumes less power than most other drives from the same price range, thus saving energy and expenses for the end users. The 20GEAND125JA0NNNNN drive can meet the demands of nearly any standard motor control application and it is well-suited for the control of low-inductance motors.

The Allen-Bradley/Rockwell Automation 20GEAND125JA0NNNNN PowerFlex 755TS series motor control drive operates on a voltage rating of 480 Volts AC or 650 Volts DC and an output power rating of 100 Horsepower. The drive comes with an open type of enclosure with an IP 00 protection rating that supports a wider operating temperature range than drives with stronger enclosures can support. The operating temperature range for the 20GEAND125JA0NNNNN drive is from -20 to 50 degrees Celsius or -4 to 122 degrees Fahrenheit. The drive also has corrosive gas protection and it is suitable for use in an environment with a relative humidity level ranging from 5 to 95% (non-condensing). Other optional features included with the drive are filtering, a default CM cap connection with a jumper installed, and dynamic braking with an internal transistor. The 20GEAND125JA0NNNNN drive has a current rating of 125 Amps and an electrical efficiency rating of 97.5% at the rated current.