20GEAND156JA0NNNNN | Allen Bradley Drives PowerFlex 755TS

20GEAND156JA0NNNNN

20GEAND156JA0NNNNN

Description:

The 20GEAND156JA0NNNNN motor control drive is produced by Allen-Bradley/Rockwell Automation and is available through the PowerFlex 755TS drive series. The drive has an AC input option and an IP 00 (NEMA/UL Open Type) enclosure. The drive comes with corrosive gas protection (XT) and it supports forced-air cooling. The 20GEAND156JA0NNNNN drive has a voltage rating of 480 Volts AC or 650 Volts DC and an internal transistor for dynamic braking.

Rated 4.9 with 15 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Call

Submit RFQ for 20GEAND156JA0NNNNN

Add more parts to quote

Description:

The 20GEAND156JA0NNNNN motor control drive is produced by Allen-Bradley/Rockwell Automation and is available through the PowerFlex 755TS drive series. The drive has an AC input option and an IP 00 (NEMA/UL Open Type) enclosure. The drive comes with corrosive gas protection (XT) and it supports forced-air cooling. The 20GEAND156JA0NNNNN drive has a voltage rating of 480 Volts AC or 650 Volts DC and an internal transistor for dynamic braking.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 20GEAND156JA0NNNNN.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 15 reviews

    Technical Specifications for 20GEAND156JA0NNNNN

BrandAllen-Bradley / Rockwell Automation
SeriesPowerFlex 755TS
Part Number20GEAND156JA0NNNNN
Corrosive Gas Protection and Cooling TypeCorrosive Gas Protection (XT), Forced Air
Input TypeAC Input with Precharge, No DC Terminals
Enclosure TypeIP 00, NEMA/UL Open Type
Voltage Rating480 Volts AC, 650 Volts DC
Current Rating156 Amps
Power Rating125 Horsepower
Filtering and CM Cap ConfigurationDefault CM Cap Connection (Jumper Installed), Filtering Included
Dynamic BrakingInternal Transistor, No Internal Resistor
Human Machine Interface (HMI)No HMI
CertificationsCE, c-UL-us, EAC, EMC, KCC, RCM, SEMI F47
BrandAllen-Bradley / Rockwell Automation
SeriesPowerFlex 755TS
Part Number20GEAND156JA0NNNNN
Corrosive Gas Protection and Cooling TypeCorrosive Gas Protection (XT), Forced Air
Input TypeAC Input with Precharge, No DC Terminals
Enclosure TypeIP 00, NEMA/UL Open Type
Voltage Rating480 Volts AC, 650 Volts DC
Current Rating156 Amps
Power Rating125 Horsepower
Filtering and CM Cap ConfigurationDefault CM Cap Connection (Jumper Installed), Filtering Included
Dynamic BrakingInternal Transistor, No Internal Resistor
Human Machine Interface (HMI)No HMI
CertificationsCE, c-UL-us, EAC, EMC, KCC, RCM, SEMI F47
s

About 20GEAND156JA0NNNNN

The product code 20GEAND156JA0NNNNN is the product code for an Allen-Bradley/Rockwell Automation PowerFlex 755TS series motor control drive with a voltage rating of 480 Volts AC or 650 Volts DC. The drive operates on the basis of TotalFORCE technology and it comes with an impressive set of safety features and motor control features. Additionally, the drive has multiple slots for hosting optional modules that can expand its features and functions and it comes with a couple of built-in special features. The optional functions included with the drive are filtering, corrosive gas protection, a jumper-based CM cap connection, and dynamic braking with an internal transistor. The 20GEAND156JA0NNNNN drive has an open-style enclosure marked with an IP 00 (NEMA/UL Open) environmental protection rating. The 20GEAND156JA0NNNNN drive supports a maximum current rating of 156 Amps and its maximum short circuit protection rating is 100,000 Amps RMS (symmetrical). The drive has a DC link impedance rating of less or equal to 4 percent and the frequency tolerance range is from 47 to 63 Hertz. 



The Allen-Bradley/Rockwell Automation 20GEAND156JA0NNNNN PowerFlex 755TS series motor control drive has a logic control ride-through time of 0.5 seconds minimum and of up to 2 seconds in typical conditions. The 20GEAND156JA0NNNNN drive uses 3-phase input and it supports a ground fault trip along with the short circuit trip. The drive also supports 15 milliseconds of power ride-through time at a full load and a load ratio of 5:1 for every listed loop bandwidth. The 20GEAND156JA0NNNNN drive has compact dimensions and it offers selectable motor control, acceleration/deceleration modes, stop modes, that the users can choose from and program to meet their specific application needs. The drive can control a motor’s speed with a high degree of precision. The 20GEAND156JA0NNNNN motor control drive has an economizer option for controlling induction motors and a torque accuracy rating of 1.2%.



Repair Services for 20GEAND156JA0NNNNN

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 20GEAND156JA0NNNNN. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 20GEAND156JA0NNNNN

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 20GEAND156JA0NNNNN

Resolutions For 20GEAND156JA0NNNNN

About

Technical Specifications for 20GEAND156JA0NNNNN

BrandAllen-Bradley / Rockwell Automation
SeriesPowerFlex 755TS
Part Number20GEAND156JA0NNNNN
Corrosive Gas Protection and Cooling TypeCorrosive Gas Protection (XT), Forced Air
Input TypeAC Input with Precharge, No DC Terminals
Enclosure TypeIP 00, NEMA/UL Open Type
Voltage Rating480 Volts AC, 650 Volts DC
Current Rating156 Amps
Power Rating125 Horsepower
Filtering and CM Cap ConfigurationDefault CM Cap Connection (Jumper Installed), Filtering Included
Dynamic BrakingInternal Transistor, No Internal Resistor
Human Machine Interface (HMI)No HMI
CertificationsCE, c-UL-us, EAC, EMC, KCC, RCM, SEMI F47
BrandAllen-Bradley / Rockwell Automation
SeriesPowerFlex 755TS
Part Number20GEAND156JA0NNNNN
Corrosive Gas Protection and Cooling TypeCorrosive Gas Protection (XT), Forced Air
Input TypeAC Input with Precharge, No DC Terminals
Enclosure TypeIP 00, NEMA/UL Open Type
Voltage Rating480 Volts AC, 650 Volts DC
Current Rating156 Amps
Power Rating125 Horsepower
Filtering and CM Cap ConfigurationDefault CM Cap Connection (Jumper Installed), Filtering Included
Dynamic BrakingInternal Transistor, No Internal Resistor
Human Machine Interface (HMI)No HMI
CertificationsCE, c-UL-us, EAC, EMC, KCC, RCM, SEMI F47

About 20GEAND156JA0NNNNN

The product code 20GEAND156JA0NNNNN is the product code for an Allen-Bradley/Rockwell Automation PowerFlex 755TS series motor control drive with a voltage rating of 480 Volts AC or 650 Volts DC. The drive operates on the basis of TotalFORCE technology and it comes with an impressive set of safety features and motor control features. Additionally, the drive has multiple slots for hosting optional modules that can expand its features and functions and it comes with a couple of built-in special features. The optional functions included with the drive are filtering, corrosive gas protection, a jumper-based CM cap connection, and dynamic braking with an internal transistor. The 20GEAND156JA0NNNNN drive has an open-style enclosure marked with an IP 00 (NEMA/UL Open) environmental protection rating. The 20GEAND156JA0NNNNN drive supports a maximum current rating of 156 Amps and its maximum short circuit protection rating is 100,000 Amps RMS (symmetrical). The drive has a DC link impedance rating of less or equal to 4 percent and the frequency tolerance range is from 47 to 63 Hertz. 



The Allen-Bradley/Rockwell Automation 20GEAND156JA0NNNNN PowerFlex 755TS series motor control drive has a logic control ride-through time of 0.5 seconds minimum and of up to 2 seconds in typical conditions. The 20GEAND156JA0NNNNN drive uses 3-phase input and it supports a ground fault trip along with the short circuit trip. The drive also supports 15 milliseconds of power ride-through time at a full load and a load ratio of 5:1 for every listed loop bandwidth. The 20GEAND156JA0NNNNN drive has compact dimensions and it offers selectable motor control, acceleration/deceleration modes, stop modes, that the users can choose from and program to meet their specific application needs. The drive can control a motor’s speed with a high degree of precision. The 20GEAND156JA0NNNNN motor control drive has an economizer option for controlling induction motors and a torque accuracy rating of 1.2%.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 20GEAND156JA0NNNNN. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 20GEAND156JA0NNNNN. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF