The 1391-T035ET servo controller is a servo controller that has been designed to be compact to save space while providing powerful operation. It belongs to the 1391 servo controller series by Allen-Bradley. Servo controllers are pieces of equipment that are intended to control motor speed, torque, acceleration, and deceleration smoothly. All these settings are previously programmed so that there will not be any sudden changes. The Allen-Bradley 1391-T035ET servo controller needs to be installed carefully, and special attention must be paid to the way the controller is wired to the different pieces of equipment that it needs to work with. The wiring must be copper wiring and it must be rated for operations at 70 degrees Celsius minimum. Motor cables should be as short as possible to avoid voltage loss.
The Allen-Bradley 1391-T035ET servo controller can operate with both single and 3-phase applications. It comes with different voltage ranges and 2 different frequencies that can be adjusted to match the different application requirements. The chassis of the controller must be properly grounded to avoid electrical noise and clearances of at least 3 inches must be left on each side of the controllers, especially on the top and bottom. It is recommended to mount the Allen-Bradley 1391-T035ET servo controller in an environment that does not contain moisture or corrosive vapors. It is also important to keep the ambient air temperature below 60 degrees Celsius. Higher levels of moisture can affect the electrical functions of the controller. It is also important to keep humidity levels between 5 and 95% without condensation.
Repair Services for 1391-T035ET
||Ask|| Get Quote |
Our highly skilled technicians can repair your 1391-T035ET. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Revisions for 1391-T035ET
Please refer to the manual for more information about the 1391-T035ET such as the wiring diagrams, data sheets,
firmware information and migration or obsolescence details.
|Revision Part #
||Also Known as
||1391-T035ET/A, Series A, Rev A